- Joined
- Jul 5, 2015
- Messages
- 6
- Reaction score
- 0
- Age
- 34
Hello I have a Phantom 1.1.1 with the H3-3D Zenmuse Gimbal installed and working great! But my only issue is that I can't get any of the settings for the H3-3D Gimbal to save in teh Naza Software (Tilt Control Gain, Horizontal Limit, Vertical Limit, FPV Mode). I am connecting the drone to the USB and can change other settings on the drone just fine but don't see these changes working for the gimbal.
Any advise would be appreciated, as currently I see the guards in my video when flying forward and would like to get the Horizontal limit adjusted to remedy this. See the image below for what area I am referring to for adjusting.
I am not sure if this is a software/connection issue OR if my Gimbal itself has an issue preventing these settings from working?
Any advise would be appreciated, as currently I see the guards in my video when flying forward and would like to get the Horizontal limit adjusted to remedy this. See the image below for what area I am referring to for adjusting.
I am not sure if this is a software/connection issue OR if my Gimbal itself has an issue preventing these settings from working?
