GL300K (P4P V2 controller) soft bricked, no boot, can enter recovery

Joined
Nov 30, 2022
Messages
1
Reaction score
0
Age
28
I messed up and flashed a broken boot.img to the remote after unlocking the bootloader (I tried patching it with magisk), and now I've soft bricked it and it won't boot. I can get it to boot into recovery mode by holding down the button on the screen while turning on the remote, but it's a very basic recovery menu and I only have options to wipe cache, factory reset, and reboot. The remote isn't recognized by ADB or fastboot in recovery or otherwise - before I soft bricked the unit, I had to flash an older version of the stock firmware to get fastboot to work at all when booted into fastboot mode. I also can't get the controller to be recognized by DJI Assistant 2. What can I do now? I just want it back to stock, I'll stop playing with it after this
5_2x.gif
is there a way I can boot into fastboot mode with button presses? Is there a utility I can use to flash the stock firmware that isn't ADB/fastboot? Can I get ADB working from the recovery screen? Any input is greatly appreciated
 

Members online

Forum statistics

Threads
143,066
Messages
1,467,356
Members
104,934
Latest member
jody.paugh@fullerandsons.