gimbal to servo spline

[dangermouse]

Hi
I am trying to repair my phantom 2 vision and most of it is fixed BUT i need the small plastic insert that goes into the side of the camera that pushes over the splines on the servo. This small plastic peice can not be brought seperatly ony with a new camera!!!!
£350.00. I am trying to cast one with areldite but not much luck so far. The gimball spline is non standard and so ne existing splines from RC shops fit.
Has any one got one of these inserts they could sell me from a smashed up camera or know where i can get one?

Cheers

Neil

 

[paulajayne]

Pics and measurements may help us to come up with an alternative solution.

 

[dangermouse]

Hi below is the replacement plug i am after.

Currently trying to makeone via a casting with areldite but it is very small.

Cheers

Neil

 

[zenoshrdlu]

Looking at the spline from my Phantom Vision, it looks like a standard 15 tooth 1F spline - see https://www.servocity.com/html/futaba_servo_splines.html#.VCp6QIdXPw about Futuba servo splines. It certainly has 15 teeth.

 

[dangermouse]

Thanks for that i will let you know how i get on i have orderd a set of ebay i can cut and glue that into the camera case

Cheers

Neil