Thanks to Mr_P for the following. This is the first time I have seen this simple alignment fix.
The video is
The video is
Last edited:
There were a lot of happy people back when that ability was first added with I think it was FW 1.4 in late 2015. Before that, the folks with tilted horizons which were not fixed with an IMU/Gimbal calibration could only fix their horizon for that flight by entering the sub menu system in the app. The scroll wheel adjust was much easier and less disruptive while flying.Thanks to Mr_P for the following. This is the first time I have seen this simple alignment fix.
Keep the C2 button on the rear of the controller pressed, and at the same time turn the right hand wheel. A grid will be displayed and at the same time the gimbal will tilt as you turn the wheel.
I put a small table in front of the camera to establish the horizontal plane.
View attachment 86576
Below, the table edge is horizontal. Release the C2 button and the gimbal will be horizontally aligned.
View attachment 86578
We use essential cookies to make this site work, and optional cookies to enhance your experience.