front arm stickers

[lotusteve]

had my advanced just two weeks now and the front silver stickers are coming away from the plastic, i keep pressing them back on but they slowly come back up again. how do i keep them from peeling up.

 

[wellsy57]

Try adding a little glue. I wouldn't recommend super glue though, in case you ever wanted to remove the shell. Maybe just some Elmers.

 

[D4T_PoM]

I had the same issue Steve, being me I just took them off, they were like that when I took the P3 out the box, who ever was putting the stickers on was not putting them on properly in the factory is my guess.

But now on my P3P the first thing I did when I took it out the box is firmly push the gold stickers down and so far so good and have had no issues with them coming off.

 

[Dronason]

If you start to open the shell, the best is to cut the stickers in 2 pieces.
So you can either glue them or you can also replace them with some paint.

 

[Meta4]

how do i keep them from peeling up.

Simplest solution - replace them
phantom arm stickers | eBayhttp://www.ebay.com/sch/i.html?_odkw=phantom+arm+stickers&LH_PrefLoc=2&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xdji+phantom+arm+stickers.TRS1&_nkw=dji+phantom+arm+stickers&_sacat=0

 

[rexster314]

I have a vinyl cutter and cut my own. Right now I've got gold stickers on my V2+, next week might be some other color.

 

[Travis(IdahoPhantomPilot)]

I just used some clear tape a few months ago and it's still holding.

 

[lotusteve]

our old lass come up with a idea.. brush on some clear nail farnish at the bottom of each sticker. done this and touch wood they are not peeling up.