Posted earlier but the thread went cold so trying to give more info about this issue.
7/24 - Took the P3A out for a flight and all went well for most of the flight time. About 12 min into the flight I brought it back and turned off recording and landed it but didn't power off. I decided to burn some more battery time so I took it back into the air but was not recording.
@~13 min into the total flight I was about 45'h and 400' distance and FPV went black. Stated no data but RC controls continued to work. I checked HD and found all channels to be locked, no movement at all. Since I still had RC controls I flew the bird back to me and at about 150' FPV came back.
Now here's the kicker. When I check the flight logs, at the instant I lose FPV until I get FPV back the logs show no data. It's like the bird just jumped from 400' to 150' in an instant.
I can upload the logs if anyone cares to take a look. I'd like to get to the bottom of this. Thanks!
Firmware 1.2.8
DJI App 1.2.0
7/24 - Took the P3A out for a flight and all went well for most of the flight time. About 12 min into the flight I brought it back and turned off recording and landed it but didn't power off. I decided to burn some more battery time so I took it back into the air but was not recording.
@~13 min into the total flight I was about 45'h and 400' distance and FPV went black. Stated no data but RC controls continued to work. I checked HD and found all channels to be locked, no movement at all. Since I still had RC controls I flew the bird back to me and at about 150' FPV came back.
Now here's the kicker. When I check the flight logs, at the instant I lose FPV until I get FPV back the logs show no data. It's like the bird just jumped from 400' to 150' in an instant.
I can upload the logs if anyone cares to take a look. I'd like to get to the bottom of this. Thanks!
Firmware 1.2.8
DJI App 1.2.0