DJI fc40 RC question

Joined
Jul 27, 2018
Messages
6
Reaction score
1
Age
43
Hello,

Recently the antenna on my RC broke while storing it. I bought a new antenna and installed it. However, the connector broke of the printing plate. Long story short, after some soldering i ended up messing up the whole printing plate.

After some searching, i found a secondhand RC controller on Ebay. My question: will this secondhand RC work on my own FC40 drone?

Grtz
 
It should if it's 5.8 ghz.
Been awhile since my P1 but there should be a button/light on bottom of drone.
Push in until led lights flash on drone and then turn on remote
led lights should then stop flashing
 
It should if it's 5.8 ghz.
Been awhile since my P1 but there should be a button/light on bottom of drone.
Push in until led lights flash on drone and then turn on remote
led lights should then stop flashing

Okay, thanks!
 
Yesterday a new (secondhand) PVT581 controller arrived. I removed the 5,8G VT plate with the antenna attached to it and put it in my own RC (since the RC i ordered looked a little messy). However, when i tried to put the DJI on, nothing happened. Also the LED is flickering : 4 times red (fast) 1 second pause, 4 times red and so on. Which means (if i'm not mistaking) that the RC does not connect to the drone itself.

Does annyone have a solution for this issue?
 

Members online

No members online now.

Forum statistics

Threads
143,066
Messages
1,467,358
Members
104,935
Latest member
Pauos31