Calibration? Phantom vision 2

[Angelfire]

Hi fellow forumers, a complete novice here looking for a little help.

Having flown my PV2+ twice I am now looking at calibrating my transmitter, which I assume I should have done before any flying took place.

I have watched youtube a hundred times, looked in the DJI manual and I am still as lost as ever with this calibration lark. So here are the questions I really need answering.

What app do I require to give me the graphics to calibrate the transmitter.

What app do I need to upgrade the Phantom PV2+.

And the main question, where do I look for them, I have been on the DGI webby site where there are loads of the **** things. Help I am lost.

What is this all about please. (Download the Firmware via Assistant software

Regards

Phil*

 

[rilot]

The DJI Phantom Assistant and RC assistant are the programs you use to do everything you ask about.
Here: http://www.dji.com/product/phantom-2-vi ... s/download

Grab Phantom 2 Vision assistant v3.2 and RC assistant.

 

[mmn]

To add, having just gone through this myself. The RC assistant connects to the transmitter and is used for calibration of the sticks. The Vision Assistant connects to the quad where you can calibrate the transmitter again, but this time to the quad.

You're also going to need the Windows driver.

It was very confusing to me also, even though it's in the manual and there are some good YouTube videos about it.

Regards
Michael

 

[Angelfire]

Many thanks for the response guys, seems the info I require is all there.

Where do I get the "windows driver" from MMN. Sorry the questions are a bit basic but I am a bit lost with my PV2+.

Regards

Phil*

 

[OI Photography]

Many thanks for the response guys, seems the info I require is all there.

Where do I get the "windows driver" from MMN. Sorry the questions are a bit basic but I am a bit lost with my PV2+.

Regards

Phil*

It's down near the bottom of DJI's downloads page: http://www.dji.com/product/phantom-2-vi ... s/download