- Joined
- Jun 30, 2014
- Messages
- 6
- Reaction score
- 0
After 3 weeks of waiting for my IT department to get me a windows machine that would let me install unsigned drivers, i was ready to upgrade the 2016 firmware for my phantom 2.
I started with the RC, and it went fine until it told me to power cycle. Now it wont power on.
Started with fresh batteries, and they are installed correctly.
This is an old Phantom 2 V1, with the slider on back for the camera tilt.
Has anyone had any luck, getting the R/C fixed after it bricks ?
When power button is turned on, The PC recognizes that a device is plugged into USB, but it no longer says DJI product in the device manager. No light and no beeps.
Any help is appreciated.
--Nick
I started with the RC, and it went fine until it told me to power cycle. Now it wont power on.
Started with fresh batteries, and they are installed correctly.
This is an old Phantom 2 V1, with the slider on back for the camera tilt.
Has anyone had any luck, getting the R/C fixed after it bricks ?
When power button is turned on, The PC recognizes that a device is plugged into USB, but it no longer says DJI product in the device manager. No light and no beeps.
Any help is appreciated.
--Nick
