Recent content by yotamkasam

Flytrex core 2 comes as bare electronics board with no enclosure and should be mounted with double sided tape or Velcro. I wanted it in an enclosed box to make it easier to remove and install the Micro SD card between flights. The enclosure is mounted on the Phantom landing gear and you may...

I made this toolbox for my DJI Phantom backpack bag case, it includes a dedicated place for RC batteries, Allen key and a magnet to hold the motor tightening tool and lots more space for screws and parts. Toolbox size fits Pv2+ battery pockets. A latch holds the toolbox firmly closed and makes...

Here: viewtopic.php?f=27&t=20514

Previous topics discussed the possibility, here's how to open up the battery in order to view / examaine / replace faulty swollen LiPo cells: http://ninoransenberg.com/2014/10/30/dji-phantom-vision-2-battery-disassembly-how-to-video/

Re: No satellites, no camera pitch (post-crash trauma) Thanks Meta4, it was indeed the problem, though on the gimbal side, but same cable.

Hi guys, Today I was flying near a motorsport area when all of a sudden my PV2+ started descent and I could not control it any more, maybe I just lost battery power, not sure. When I tried to gain height someone passed by and hit the Phantom, it got a good spin to the ground but there was no...

I am using a mini Ipad withe the Phantom but can find an Android phone to run this app.

I was so happy to read this post and left everything aside just to do it and test it right away, and boy, I was so disappointed to see no change whatsoever. I am sure it works for others and would recommend it but for me, nothing. I went for the complete solution including reversing the flat...

Re: Car charger - Plug cover If you are buying the car charger that comes with named plug you may want to consider 3D printing this cover: http://www.thingiverse.com/thing:437538

Plug cover for DJI Phantom Vision 2 Plus car charger http://www.thingiverse.com/thing:437538 iPad mini holder for DJI PV2+ remote control (More pics coming soon): http://www.thingiverse.com/thing:437562 Other 3D printed projects: http://www.thingiverse.com/ninora/designs

Re: How to fix a vibrating / shaking / crazy P2V+ camera gim Simply pulling the two apart.

Re: How to fix a vibrating / shaking / crazy P2V+ camera gim If you are able to rotate the shaft while in the base (if I remember correctly you tried that by opening the metal cover and turning the half moon) then the shaft is loose and you can safely detach the motor from its base.

Re: How to fix a vibrating / shaking / crazy P2V+ camera gim The thread locking (or other method) is necessary to hold the shaft in place and prevent it from rotating on the base.

Re: How to fix a vibrating / shaking / crazy P2V+ camera gim What I meant was that the controller will work perfectly even if the camera is not 100% aligned but it will show on video. As for locking it in place, you have to do something about it otherwise the problem will repeat maybe even in...

Re: How to fix a vibrating / shaking / crazy P2V+ camera gim The black ribbon survived, there was no need to touch it. However, the treads locker is too soft and while holding the parts in place it allows too much flex. Need to find better formula.