Recent content by vico36

  1. V

    Yaw Drift re-examined

    Ah ok I didnt realize there was glass under the bigger level in the first pic. Makes sense now. Ill probably give the glass on the 4 motors a try.
  2. V

    Yaw Drift re-examined

    Hey, I'm also experiencing yaw drift and it's driving me mad! When you say "way off level" in your first image, only one of them is way off, is the imu unit right below this level? it's my undestanding that the imu unit is somwhere inside the naza module. Let us know the results, I really want...
  3. V

    Switching a P2V+ to work with a gopro...!

    Reporting on mine after flying with it... well, trying to. Tried it for the first time today with the GP4S + H4-3D, the drone would drift/oscillate a lot, it wouldn't hold its position like before the mod. It was a little bit windy (24km/h as per accuweather), but nothing that the phantom...
  4. V

    Switching a P2V+ to work with a gopro...!

    So... I went ahead and did this mod. Bought H4-3D + GP4 silver. Installed everything and so far it is looking good, although I haven't flown with it yet. Had a minor issue with the 8pin cable. Basically couldn't route it through the closest back leg due to it already being full of cables...
  5. V

    FPV goggles with Vision Plus

    I bought the Zeiss cinemizer, they're plugged in via hdmi to mhl connector to my note 4. I'm not quite happy with the results, it's not really immersive, the video quality is poor (to be expected since the max fpv resolution is 640x480 anyway). On top of that, the dji vision app is pretty...
  6. V

    Switching a P2V+ to work with a gopro...!

    Have a pv2+ myself and really interested in doing this mod since I find the original camera's quality really bad...I don't have a gopro nor a zenmuse though so this brings the cost to about 650£-ish for gopro 4 black + gimbal (1000$ or so). To the people who have done it, do you think the...
  7. V

    Flytrex Live 3G Released - Review

    Mine did not automatically update and I could see the latest version in my flytrex account settings, I managed to install the latest firmware after many reboots and reinstalling the FTDI drivers about 10 times eh. Turns out using the "no longer supported" ftdi drivers...
  8. V

    Flytrex Live 3G Released - Review

    thank you for your help, I think the problem with mine is the drivers, there must be some weird conflict, the first time I tried, I could see COM6, which is the virtual usb com thingie. Now I can't see it anymore, and after uninstalling-reinstalling the drivers, it won't come back... annoying.
  9. V

    Flytrex Live 3G Released - Review

    Solid red, solid purple, solid blue and then flashing green For what it's worth, the green connected on the live programmer software shows even when the live 3G isn't actually connected.
  10. V

    Flytrex Live 3G Released - Review

    Assuming the setup executable link for windows is http://www.ftdichip.com/Drivers/CDM/CDM ... tified.exe then yes I did install it. The first time I tried it a few days ago, I actually could choose between both COM1 and COM6, not knowing which one to choose I probably (can't remember) tried...
  11. V

    Flytrex Live 3G Released - Review

    Yes, however for some reason when i browse the firmware file, after selecting it, the firmware name isn't shown in the textbox below, not sure if intended.
  12. V

    Flytrex Live 3G Released - Review

    Anybody having issues updating the live 3G firmware? in my flytrex account it says I have v15 and I should update to v16, tried doing that using the live programmer but after connecting the live 3G to my pc successfully, nothing happens in the live programmer, the red progress bar stays red.
  13. V

    New flyer looking for some help increasing range

    How does stage 2/3 compare to the stock antennas with regards to aiming? I'm aware that with stage 2 you need to aim at the phantom, but doesnt that also apply to the stock antenna?
  14. V

    Camera slightly misaligned

    I did another advanced IMU calibration with the phantom being cold, didn't get the "too hot" message this time, however the camera is still not perfectly aligned (same as before). Sadly I don't have a spirit level to test the table, going to order one and will test again after. wxman: I did look...
  15. V

    Camera slightly misaligned

    Can confirm that the table is fine at least :P I did try the advanced IMU, I got the "too hot" warning and kept going but it didn't do anything. Will try again when it is cold, thanks for the answers!