Recent content by Totorama

I think your right... I'll post the outcome later when its resolved. But thanks very much for all your help and suggestions.

Update, 1. Downgraded the GL300E to V01.02.00 OK. 2. Followed the Dumldore procedure to backup the FW from the P4P OK. 3. Followed by the transfer of FW, (V01.03.0509) to the P4P 4. Upgrade starts and fails again at 72%..... To me this is looking more & more like a hardware/gimbal problem.

Msinger, Thanks for the quick response. I'll download the FW and give it a try. BTW. lots of useful info in that link. Cheers.

Still reviewing the tread... It looks a bit risky to me. This thread is also primarily a Mavic thread and very Mavic orientated. I can see the different bin files for the P4P OK, (I assume I would downgrade to 01.03.0509_P4P_dji_system.bin using the tool), but what about the P4P+. Am I correct...

Further update.. 1. Removed SD card from the controller (GL300E) 2. Formatted the SD card (FAT32). (Full format from the PC & not Quick format) 3. Downloaded Controller FW from DJI site (V01.02.02.00 2017-09-30) 4. Extracted BIN file from the ZIP and copied it to the SD card 5. Installed SD...

Hi. msinger, I'll try your suggestion of formatting the SD card but where can I get previous version of the drone FW. The DJI Assistant 2 only shows the latest version.

Just tried to reapply firmware, (V01,04.0602) to the aircraft using DJI Assistant 2. After several attempts it keeps failing at 72% of the install with error code 0x028103. Just before the failure, the gimbal rotates to the left then very slowly back towards center. Drone then reboots and DJI...

Thanks msinger, I did come across this thread when trying to research the problem.. Not sure if this is the same error, although the symptoms are alike. My craft is a P4P+ not the Inspire 2, (that may or may not make a difference) but at no time have I used a RC slave.. I can try reloading all...

Just flown my P4P+ for the first time since I brought it a few weeks ago, and I'm get an error on the DJI GO 4 screen "Lens Disconnected" error. I cant see what is wrong and everything less appears normal. The drone flies ok and provides video OK. Any idea's where to stat looking. Drone and...