Recent content by Torquetube

Has anybody tried firkin the new DJI anti static compass to a Phantom 1 or FC40? I'm wondering if it would help to improve the Phantoms performance further?

As Lonewolf says be very careful when opening the controller, when you have unscrewed all the screws gently pry open the bottom and slide the front downwards so as not to pull the antenna coax and also break the antenna base. I would suggest having a look on YouTube if your not sure.

I did look at some of the legs on eBay but I'm restricted on width as my flightcase is setup for the stock legs, I've just seen that DJI sell a Zenmuse adaptor with longer legs for the Phantom 1, so maybe this might be my answer.

So after searching the internet I've only found one type of extensions that I could possibly use. http://www.shapeways.com/model/2154558/ ... antom.html Has anyone used these? If so have you got any photos of how they look installed? The only photos I can find are computer generated. I have...

Hi all, I need to raise the height of my FC40 so that gimbal and Gopro is clear of the ground so it doesn't get knocked when landing, I have a flight case that I store my FC40 in so I can't use the wide/tall landing gear, so just wondered if anyone has any links of where I can get some spacers...

Thanks for the update, sounds like I'll be making a purchase them [emoji1]

The wire is a small coaxial wire, it has come out at the top of the small tin cover just below the gimbals, I would say it's going to need re soldering.

Re: FC40 control by new DJi Controller with LiPo & Gimble wh I would also like to know this, hopefully someone has tried this and can let us know.

Just wondered if anyone had tried it with an FC40 as it says that the 5.8ghz is compatible with the Vision plus but doesn't mention the FC40?

Just looking to upgrade my transmitter on my FC40, I've been thinking about changing to a Spektrum 2.4ghz system so I can have telemtry, but I'm just wondering if anyone has tried binding and using the new DJI transmitter with the thumbwheel? As the Vision uses 5.8ghz so wondered if they are...

Glad I read your post cos I was just about to order some.

Re: TK102 gps tracker interference Thanks Damon, where about's do you mount yours?

Hi all, I have been seriously considering a TK102 gps track for my FC40 incase in case I crash it or it decides to fly off. I have read a few reports on other forums that these trackers can cause interference to phantoms? Has anyone had anything like this happen with these trackers?

Re: First post, new fc40, need to upgrade I'm in the same boat, have an FC40 waiting for its maiden flight on Xmas day, I was considering an SJ4000 camera plus a gimbal, also there seems to be lots of fake SJ4000's on the market. I opted for a Go Pro hero 3 White edition as Amazon had them...

Hi, unfortunately the camera doesn't have any sound, which is not a bad thing as all you will hear is the noise from the motors. If you want sound the only option is to upgrade the camera as far as I know.