Recent content by Tirex

Downgrade is correct To lower the version it is necessary on each version. For example, from 1.6.8 to 1.5.7, then to 1.4.6. Finish FW 1.3.5. If someone gets to lower 1.3.5 and everything will work, tell us how and what they did Here is the corrected instruction: 1 - format the card on the...

I tested again at the first start Dji go 3.1. all modifications are removed, firmware 1.7.9.

And you make the changes the program magic, then connect the drone to your phone, start the DJI to go, and then re-connect the remote to your computer, turn on the magic button and click iwinfo and see the result. In general, following a decision problem, you need to add the following lines to...

at the first start Dji go all the modifications are removed, that program MAGIC 5.2 .On 2.4 GHz power becomes 17dBm. CE Region back

You generally are understood what I mean? No? I tell you that in different regions have different frequency band to 5.8, we for some reason I write about power? With that power here? Yes, the picture one who did it right, power 5.8 is not changed by changing the region! But the bandwidth and...

Now it seems, the fee on the 5.8 Ghz, at the bottom, just above its wi-fi on 2.4. Ghz. Moreover, I myself have changed the fee to 5.8 to the other with taobao on 1w power. Of course, I doubt that it 1w, but the effect of it almost 3-4 times range. Now I have my Standart flies up to 5 km. I...

And here the Wi-Fi 2,4 GHz module and 5.4 Ghz? This is quite different modules, which are independent from each other. Wi-fi 2.4 Ghz module panel is responsible for receiving video from a drone on the panel. A 5.4 Ghz is management. You posted the circuit board, so it does not RC Phantom 3...

Yes that's right. You need to modify these files and put in place REG = "BO", REG = "US". Then you will become the US region. But still I advise to change the channel between the drone and the remote control. Because the default 6th there. Sometimes, in the city where a lot of wifi networks...

I'm on the CE configuration, flying less than US. Initially I had CE, after all the tests, US, proved to be the best. It became my drone fly + 30% range. You can do this proveprit, changed in files, watchlog.sh watchlog2.sh REG = "BO" in the REG = "CE". The letters should be only capital

And here the wifi chip at all? and 2.4 Ghz, we are talking about 5.8 Ghz, that when the BO region, US, CE. Changing the frequency range of 5.8. I even painted, what frequency to which region. Mod 27dBm relationships do not have anyone to the choice of the region and Fcc mod

country BO: DFS-JP (2402 - 2482 @ 40), (N/A, 30), (N/A) (5735 - 5835 @ 80), (N/A, 30), (N/A) The frequency range for control in Japan 5735 - 5835 Mhz with the channel width 80 Mhz is 30 dBm country US: DFS-FCC (2402 - 2472 @ 40), (N/A, 30), (N/A) (5170 - 5250 @ 80), (N/A, 17), (N/A) (5250 -...

This is all great, but for some reason it is important which channel 2.4., And the range is not important in terms of interference. If you have a technical education, you need to understand. what a narrow bandwidth. In the BO, at 5.8 Ghz, it is narrow, that if any interference, control will be...

The problem was in the 13th channel on 1.7.9 If you choose to scan from 1 to 13th channel, and just when selecting the 13th channel, FCC mod US does not work. Those. if postavat REG = "US", it is impossible to put any tick about the 13th channel. Decided problems scan13.sh file, set the value of...

In general, under this program, which replaces files scripts their Magic Power v5.2. Nowhere today I did not go to fly, because last night decided to fix the BO region, in the US. Fixed so that had to fluster the USB console - UART and telnet right handle, then he changed his well-handled.In...