Recent content by T8terTotz

Thanks for the replies, good info!

Besides the DJI app are there any others out there that support the android format? Looking for flight, support, tracking, anything useful. TIA

I can see the headlines now... US Military spy drone crashes in small town America! Plastering military stickers all over it might not be the way to go, we're under enough scrutiny. I like the scheme, just not in this format, if the stickers were non military based that would be different, sorry.

Going through a ton of crap with GLB right now, I put in a claim with ebay, we'll see how that turns out. Overall the gimbal worked fine out of the box (paper manila envelope with packing peanuts is more like it). I just can't get the pitch control to work. I've been trying to get help for...

Just be careful buying from Goodluckbuy. I'm presently going through a ton of crap trying to get my gimbal pitch control working. They have offered no real help after 25 emails back and forth. They directed me to a website that was supposed to contain the firmware for the gimbal, after...

I have been attempting to get help from goodluckbuy regarding the gimbal I have not been able to get to pitch using the transmitter. After several emails I was sent to a link I was told is the firmware for the gimbal. The link brought me to a download page displaying what I believed was the...

Btt

More observations: When connected to Naza F2 (pitch) bottom pin and connected to A1 on Roll pins I can adjust the center line using the Naza program. I can do the same using Naza F1 (roll) bottom pin to A1, it also did not matter what hz setting was using. Unfortunately I cannot replicate this...

Stingray, same exact issues? Pitch side pins not doing anything either? Can you get it to roll like I can? It seems like something is reversed somewhere, why roll will work but pitch isn't is killing me.

OK, I connected the bottom F2 Naza pin to A1 as suggested. There are two A1 pins on the board, one on the left and one on the "Roll Pitch" pins up top, Ai is on the roll side. (See previously posted pics) When connected to either of these I can control roll but not pitch, so A1 must control...

Here are the current values Naza is set to. Again, when I manually move the phantom while it is connected to the PC and Naza is open, none of the values change. When I turn the pot (pitch screw) on the TX for pitch control, again nothing changes in Naza. HOWEVER When on this screen the X1...

you're connected to F2 right? Yes, connected to F2 and Pitch on gimbal when you turn the back screw with a screwdriver, you should see the info changing within the NAZA. None of the values change when I use the screwdriver on the transmitter, yes I am turning the screw, the values also do not...

This is what I have for Naza settings.

Re: Goodluckbuy Gimbal Questions OK, I'm totally stumped at this point and need to get this thing working ASAP. Here are a few shots of the Goodluckbuy boards... Note in the pic below on the right are 6 pins, 3 for roll, 3 for pitch. This is the underside of the above pick showing the pinout...

Re: Goodluckbuy Gimbal Questions Should the pitch the control wire have 3 wires or two? Mine only has two. Where on the control board does it connect to? I'd upload pics but the forum says the board attachment quota had been reached.