Recent content by stiofan

Hi Douglas, My bad - the proper link is - http://www.buzzflyer.co.uk/ If it is the cable you need this is the part - P2V Cable Pack http://www.buzzflyer.co.uk/DJI-Phantom- ... -208-2592/ - Have you looked inside the main body of the quad yet Douglas - I had to replace my main board as the lead...

Yep that's the lead you need - you'll have to open the shell to fix it to the board - just keep all off when doing that. I now have to replace the main board on mine - just popped a diode beside the connector - i simply turned it on and pop! DJI who? don't want to know...

Hello When my lead was damaged I had the same problems - no satellites or battery readings. You still have wifi and it's picking up your repeater. My problem was that the lead error damaged the main control board inside my quad and burned out a diode. As usual dji don't want to know. I would...

Hi philip It's coming from either the camera or the main board. Have you pictures coming through. I now have to replace my main control board today. Seems similar to my problem.

Honestly not sure but will look into it for you. There's so many theories out there it's hard to pin it down to one issue. I'll let you know as soon as I find something useful - sorry can't be of more help

Looks like you're getting zero from your unit. Both lights on and green from the wifi extender beside the controller? Have you updated to the 1.9 firmware recently as that is known to have caused some troubles. My problem was more wire orientated not app, but have a look here and see are there...

Not sure how to put pics up here Douglas - what is happening on your side - any bumps or just stop sending data?

Hi there, Sounds like the lead is damaged, it connects the camera to the main board inside the quad, same as mine - I had same symptoms, but board is a bit toasted. Unplug the lead and check it hasn't sheared or stretched anywhere and if you're comfortable with doing so - check inside the main...

Hello folks, Just sent you a pm James Just wanted to check as per diagram listed for the wiring order in the camera - is the white to the front end of the jack plug - that plugs in to the camera itself and the last being the red which fits on the jack end. If you can confirm this that would be...

Good stuff - found this page might help a lot :) https://docs.google.com/viewer?a=v&pid= ... EwNDE4ZDk0 Cheers

Good stuff - Ik zou 99% zeggen dat het de kabel - tussen de witte of de groene - maar zorg ervoor dat je ver weg van de raad van bestuur in de helikopter te blijven en doe het ergens uit dit. Ik heb ook kabel bond mijne beide zijden (binnen en buiten) om eventuele haken en ogen te houden in de...

Hello, What happened to mine was one of the command wires on the camera (the FC200) came loose. There are 4 wires in the cable - red, white, black and green The red and black are power and the others are wifi signal wires. You need to check if there are no shorts in the cable and that you have...

Fixed it now myself. All good.

Not sure if this thread is still running - having an issue with my sat and batt readings. Do the wires that link the fc200 cam to the unit also transmit said details via wifi? Cheers

Tried emailing DJI for answers but haven't heard back yet... If anyone knows if the possibility of the camera's lead causing some issues regards the wifi data - battery and satellites, although I can still fly and record perfectly with it. I had it out again last night and it does everything as...