Recent content by shaskill

I know there is a lot reported here about range extenders but these numbers are impressive. IPhone5 gives 130 yds. IPad mini 180 yds. But the range with the iPad and an Amped WirelessExtender is well in excess of 530 yds. I ran out of clear space to walk it off and still had 2 bars. Will find an...

Long and short is my kit was purchased on Amazon and is out of warranty before I tried to insert an SD card. Goes in sideways and does not register in the FC40 iPhone app. Is there any way to store the streaming video?

Thanks for the help..by chance I found a reference on YouTube to the seventh channel gimbal control. There I realized the problem why I had no response when I connected the alarm even though the Channel appeared active in the NAZA M app. You have to turn it ON in the Advanced/Gimbal settings...

I tried a different switch. One of the multi-switch devices. Could not calibrate as the LED pattern ran without the transmitter on and nothing happens with the F2 port connection. I have reverted to the stock condition, removing the PMU etc for the iPad GS and no change. Since everything else...

No luck. Too easy to assume switch is bad. I have it connected through the F2 channel. The port reads 5 volts, no matter what I do to the seventh channel lever, which is responding on the NazaM app.. I am using the main battery but the wiring diagram calls for a BEC. Does the switch require more...

It did respond fine.

Well I really want to be able to drop a Mace load on a bear soI will need a switch. I can try the separate battery approach. As to the seven channel, I did hook it up by plugging the switch into the NAZA X1 port but although the channel does work, the switch did not. Removing one of the jumpers...

That is the seventh Chanel? I have a lever for it but somehow thought it was required for the PMU installation and iOad GS use. Thanks will check it out.

I was hoping to get help with this soon so am double posting. I hope! Sorry, I dropped this problem for a month as I tackled my vineyard issues. Now the grapes are getting ripe, the turkeys have found them. I await the bears. 15 acres and very little visibility down dense rows of vines means a...

Sorry, I dropped this problem for a month as I tackled my vineyard issues. Now the grapes are getting ripe, the turkeys have found them. I await the bears. 15 acres and very little visibility down dense rows of vines means a lot of walking looking for the turkeys. I have my FC40 ready for iPad...

Sorry, I dropped this problem for a month as I tackled my vineyard issues. Now the grapes are getting ripe, the turkeys have found them. I await the bears. 15 acres and very little visibility down dense rows of vines means a lot of walking looking for the turkeys. I have my FC40 ready for iPad...

Piezoelectric. Since I posted, was reading that the Mode, U, connection to the NAZA could be used if I am staying in one flying condition, iPad. No need to move it from the OFF position. Thanks

Finally I figured out how to upgrade my FC30 for the iPad GS. Two questions 1. Is the TX useable once the iPad route is running? Can I use one channel to trigger an alarm if I install a double switch ro disable the normal response for that channel? 2. How else can I trigger an alarm when I see...

Do I need to be outside to do this; GPS full coverage?

But I still need a PC not a Mac correct?