An update... It took over two months since I placed my order but now my Flytrex with CAN-BUS adapter is finally working on my P2 Vision+ V3.0.
Following is the complete chronology:
- March 9th: Ordered Flytrex Live 3G plus CAN-BUS Adapter with $25 EMS Express shipping
- March 18th: Flytrex...
If you have vertical stability issues that vary depending on altitude I'd suspect the barometric pressure sensor, which is part of the NAZA. It might be giving bad readings only at some altitudes causing the vertical movements you're seeing below 200 feet.
I don't believe there is any way to...
Amit, could you provide an update on the defective CAN-BUS Adapters?
There haven't been any updates about this on the Flytrex Facebook page since April 7th. Today I received a response from Rebecca to my inquiry a few days ago about when my replacement adapter would be shipped but it wasn't...
Amit, on April 2nd Nir said he would be shipping out my replacement CAN-BUS Adapter as soon as possible but it still hasn't shipped. I asked for an update yesterday but he hasn't responded yet.
When do you expect to ship my replacement adapter?
- Scott
If you don't start the motors how long does it take to stabilize at -35 feet?
My theory in case you want to test it... your faulty barometer starts at 0 when powered on but as it warms up it stabilizes at -35. Before starting the motors if you then power it off and a few seconds later power it...
From my experience with my faulty barometer it appears the Phantom sets the altitude to 0 when powered on. Then any changes in altitude readings are based solely on the barometer and the GPS is not used at all in altitude calculations.
In your case the barometer appears to be faulty but not...
Following is a photo I took recently to help diagnose a problem with my Flytrex. The black cable from the Flytrex CAN Bus Adapter is plugged into the CAN Bus socket.
What's your typical negative altitude?
You might have a defective barometer like I did. The first Phantom I received showed about -300 feet as soon as I could get into the Vision app and kept counting down until it stabilized around -1700 feet.
The replacement Phantom I received works great...
Amit, thanks for the additional information about the solid and flashing green lights.
On Thursday Nir responded to the support ticket #690 that I had mentioned and he also said the CAN-BUS Adapter was the likely problem. He asked that I return it to Flytrex for you to see what caused the...
Is the camera balanced with the power off?
The new Phantom I got on March 16th was perfectly balanced but had a bad barometer. The replacement I received has a camera that tilts with the power off.
Adding two washers balances it. Does anyone know how unusual it is for cameras to be out of...
Amit, attached are three photos showing the connections. When I took the photo showing the CAN Bus Adapter the Phantom 2 Vision+ V3.0 was powered on.
The Phantom had a flashing green light indicating a good GPS signal. However, the Flytrex had a solid green light.
FYI I also sent this...
Hmmm.... It isn't working yet and Flytrex hasn't responded to the ticket I opened last night.
When I went flying today I still had the solid green light on the Flytrex with flashing green lights on the Phantom indicating I had a good GPS location. No flight information has been logged on the...
First the good news... my Flytrex arrived yesterday! Following is the complete chronology:
- March 9th: Ordered Flytrex Live 3G plus CAN Bus Adapter with $25 EMS Express shipping
- March 17th: Got email from Flytrex "Your Flytrex is on its way" with EMS tracking number
- March 18th 14:01: The...
Still haven't received my Flytrex Live 3G and CAN bus adapter, which I ordered with $25 EMS Express shipping.
Following is the chronology so far:
- March 9th: Ordered
- March 17th: Got email "Your Flytrex is on its way" with EMS tracking number
- March 18th 14:01: Tracking update "The EMS item...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.