Recent content by Rille

You need to upgrade the RC to 1.3.20, then you don´t get that massage.

The support told me I should be able to use the "gs_ofdm.bin" file on the aircraft.

I never tried to downgrade the RC. The real problem I have is to upgrade the bird and the gs_ofdm.bin file didn´t do any difference on the bird. Nothing happened when I put the gs_ofdm.bin file to the SD card and start the aircraft.

Yes I have tried several of times to download the FW on mini-Mac, MacBook air, a laptop and a stationary PC. Unzipp the fil on the computer and then transfer the file and unzipp the fil direct on the SD card. I have used memorycard reader and connect the bird direct to the computer. But every...

Yes I have tried another SD card but old ones so I don´t know if they are quick enough. Most have I used the SD card that was included with the P3P, do you think I need a better than that?

I have tried to have it off and I have tried to have it on then I start the upgrade, it still fails after 12 minutes and 15 seconds.

Yes, I put the .bin file in the root directory after I have formated the SD card. I have downloaded the bin file for at least 8 times, I have unzipped it both on the SD card and the computer but nothing helps. The upgrade starts and seems to working fine in 12 minutes and 15 seconds then it...

For me it have been working to fly with 1.3.2 on the RC and 1.1.9 on the bird, but I have tried to upgrade the bird but it always fail. After 12:15min the gimball turn red and I get a constant beep.

Okey, so I don´t need to re-upgrade the RC. But I will try to use gs_ofdm.bin file on the bird to see if that works on it.

But st support told me this to re-upgrade the controller: The following steps will help you to re-upgrade . 1）Format the USB stick，Put the gs_ofdm.bin file into the USB stick.Make sure the Firmware file is deleted ，otherwise the USB can't recongnize the gs_ofdm.bin file . 2）Turn on the remote...

I have big problem with upgrading my bird, after exactly 12:15 min it fails. I have tried at least 40 times and tried all possibles ways but still fail. I have been talking to the support and they talks about an gs_ofdm.bin file, but I can not find that any where, it should be hidden somewhere.I...

No, I have not solved the problem. I have not been able to uppdaterad my P3P. Here are what the support suggested: The following steps will help you to re-upgrade . 1）Format the USB stick，Put the gs_ofdm.bin file into the USB stick.Make sure the Firmware file is deleted ，otherwise the USB...

I bought my Phantom 3 Professional today and i have tried to update it. It worked on the controller but not on the bird, it fails after 10-15 minutes. I have been trying for 5 hours know. So now is the controller updated but not the bird, is it possible to fly with it as it is or what should i...