Recent content by RajP3S

Hi Can anyone detail a step by step guide to unbricking the RC. I am not a programmer or competent in this field. So please help those of us that don't understand this. I understand that you need a usb to serial connector and basically solder it to the WiFi board, but from that step everything...

don't use a qtip!!! rather a soft bristle brush because you don't want to smear the dirt or corrosion away you rather want to lift it away. As for your battery you should ask the store you are buying from about that. give it a very gentle brushing and remove all the dirt and corrosion and then...

I updated to 1.5 and faced a lot of problems. after trying several things i decided to take the board apart and resolder an older cpu card to the main board. that sorted out my problems and put my drone back at 1.3.5. It isn't advisable to do what i did but i had no choice because to get my...

can be saved as long as no power has gone through the system. use a soft bristled tooth brush and gently clean up that gunk. And see if your local cellphone repair shop has a facility for an alcohol bath, if they do ask nicely if they will wash your board. everything should be fine after that.

is that mud?

yes it is worth sending it back. just make sure you mention that you would prefer the drone to be set back to stock, so i believe that is 1.2. Just make sure to ask before sending.

My drone crashed into the sea had to send a diver to get it back from 6m deep. Try this it worked for me. If it landed in salt water you need to rinse the drone immediately with fresh water (sounds crazy but you need to get rid of the salt) then open the top, blow dry it then bury it in a bag...

Sorry bro but there is no way. changing location won't really help because the new updates 1.5 and 1.6 reduce the output signal strength. Only an area with no interference will perhaps let you fly further. Try updating your dji go app, as well as relinking your RC to your bird then do a full...

Sorry to hear that you're facing problems Archie, but to be honest there is no way to downgrade right now. But just to be clear which firmware are you running?

This is how you force an update from the SD card. Do this at your own risk!!! okay now that's out of the way. Format your SD card (FAT or exFAT) Place the bin file you couldn't update to on the SD card Press and hold the link button Turn on the drone When you hear the gimbal beeping (the...

Wait you managed to downgrade, how? Also check the connectors between the antennas and the pcb on the remote as well as the drone, open them and use a can of compressed air it should sort out your issue.

no helpful posts. as far as i know the service.bin is universal through out the DJI range. the architecture is the same for all the models just the functions are different. For example the P3P and P3A will both have a lightbridge bin FW but whats in each of the .bin files will be different but...

the website doesn't work and neither does the service bin file (downloaded from else where). it is too old. it was designed for pre 1.3 . so have to keep looking for a more recent version. my other theory is to find an actual downgrade fw download. this function was available previously but even...

The website doesn't work.

well the restrictions are there so you don't send your drone either too far or too high or undo any of the restrictions they have put in place. And these restrictions have been noted not just with the std but also adv and pro as well as the phantom 4. when i say restrictions i mean on the...