Recent content by Qeuein

I suspect it might just freak out and give up because of the imbalance. I've run into this as well. Not sure there's a solution. Just shoot in 2.7k and crop to rotate, I guess?

I'm also here in Appleton.

More than likely, you've thrown the Gimbal off severely enough that it may never work again, unfortunately. Before I gave up, I would try re-flashing the firmware on both the Gimal and the CMU, just to make sure there isn't anything strange going on in software. After that, though, you may be...

Do you happen to have video? I'd be curious to see this happen.

This was the problem EXACTLY. Even with the less-than perfect props, it went up right away. Thank you all so much.

A quick update: We just checked the direction and when I replaced the motor, I failed to note that the positive and negative wiring is reversed depending on whether you're looking at the black or silver capped motors. We haven't tried launching again (we clearly did a lot of damage to that...

Do you know what the correct motor directions would be? We're trying to figure out a good way to test this. All the motors are connected to the ESC's identically, so I'm not sure how they would be running in the wrong direction, though.

It was, or at least B&H said it was a DJI motor.

Good afternoon, all! This is an interesting one. Ever since we fixed some issues our Gimbal had, we have not been able to successfully launch the drone. After an initial incident with a broken motor and the installation of a replacement, we thought everything would be solved, however this...

We recently attempted to add a Storm FPV to our Phantom 1 setup, which already had an H3-2D. Though everything seems to be working well for the most part, we've been having some serious issues with getting the gimbal to balance with the AV out cord plugged in to the GoPro. I've tried taping a...