Recent content by pureandrustic

  1. P

    Goodluckbuy VISION gimbals

    Yes, I've tried without that. The filter has almost no weight at all, so I didn't expect this to help. I connected it directly to the phantoms central circuit board, using the battery from the phantom. After I fried that board, I've been using a 3S lipo I had. I've tried this before also...
  2. P

    Goodluckbuy VISION gimbals

    Hi A bit late feedback here as I fried the central circuit board by ejecting the jack extension while the phantom was powered on, so I had to soldier a bit to get power back to the gimbal. So while waiting for the new boards I've worked on this gimbal again, but it seems to be no hope to fix...
  3. P

    Goodluckbuy VISION gimbals

    I made most of the settings similar, but still having the pitch problem. I changed the Axis top to -Z, but then after doing a calibration the pitch displayed to be upside down, so I changed it back to Z. You can see from the video below that the behaviour is different, but still looks like it's...
  4. P

    Goodluckbuy VISION gimbals

    Thanks a lot for you input. I will certainly try your tips and post my results. Those flashing leds are just something I put there for orientation purposes. Have one on the other motor also. You can adjust colours, blinking speed and so on. Best reg.
  5. P

    Goodluckbuy VISION gimbals

    I'm having some pitch problems with mine. Any suggestions on what might be wrong? http://youtu.be/bEHThJTCNAk
  6. P

    Gimbal

    I'm also still waiting for that 4-pole jack extension. What settings did you use in SimpleBCG software for getting it to work properly? I copied some other peoples settings, but it seems not to work optimal. According to that german who made the 1-hour youtobe video on how to properly set the...
  7. P

    Gimbal

    Go ahead and order this one also: http://bit.ly/1rJdfVk or this http://bit.ly/1lPIsy8The phantom's jack cable for the camera is too short for the gimbal to function. That being said, the gimbal itself works very fine after doing the calibration. There is a few custom servo cables and some other...
  8. P

    Charger adapter for phantom 2 batteries

    Hi, and thanks for your reply. I also have a IMAX B6AC. What kind of cable to you use to connect it? Best reg.
  9. P

    Charger adapter for phantom 2 batteries

    Hi Does anyone know if someone is selling an adapter for the phantom 2 batteries that makes it possible to charge, discharge and balance it on at regular lipo charger? It's a hassle when I'm not able to discharge those batteries without using the Phanthom 2 itself. Best reg.