Recent content by Piloteen

When I hold down the power button for five seconds (without pressing once first) all green lights show and the red power button light is blinking. I think the battery cells are good, but the "intelligent" part is broken/defekt.

Yea, I got a lot of experience with lipo's in the rc quad/planes. I'll try find someone local with a P2 and try their battery to see if it solves the issue. I'll report back when I figure out more. Thanks so far with all your help guys! :-))

Okay, so I did go over a few connections / terminals with multimeter nowand this is what i got; Battery turned off: 12.1v at main power terminals. Battery turned off: 0.0v at com pads Battery turned off but inserted: Jumping from 3.5-4.1v at the first pins going into the battery and on the main...

It seems like a legit DJI 5200mAh, I'll check the battery terminals right away.

Haven't received anything yet. :/

It's not possible to return, but I got it real cheap knowing that I had to fix the motors but not knowing that the main board/battery was broken but I paid like 50$ for it so I rather try fix it :-) I usually build quads but never had a Dji before so I need some help troubleshooting.

Same result and I might suspect a battery failure or main board. I made a gif of the battery to show what it looks like when I turn it on ( 2EkcAZ.gif (320x180) ). When I insert after turning it on it still does same thing like when it's not powered on and all four phantom motors are beeping...

I also might suspect it could be the main board, due to I did a voltage check on the voltage pin going to X3 and got readings 1.2v-2.2v ( drops to 1.2v on each beep ). I don't get anything, because It won't power on it will not connect to my computer. Could I use a ubec to power the naza or is...

Hi, Bought a used Dji Phantom 2 yesterday, and ran into some problems. Been reading a lot on the internet but can't seem to find anyone having this problem by just inserting the battery. It's not my first quadcopter, but my first Phantom/Dji product. As soon as I insert the battery it starts...