Recent content by Peandreo

  1. P

    Drone crash

    After the last update of litchi on IOS the transmission channels are possible to choose now, i saw your log from the flight and your signal score was only 14, you need to choose channel 1 at 2.4 ghz, i had the same issuies like you, conection dropping allot for 1 seconds etc, after choosing...
  2. P

    Phantom 3 se litchi

    Is not 100% compatible, but the basic, RTH flying the drone, format SD, video options, calibration, you get all this options, never tested the FPV so i can't say if is working or not.
  3. P

    Phantom 3 se litchi

    Since the last update of litchi i had this kinda of problems, mine is in auto too, i hade only one opportunity to test the drone with good weather, i'm using a ipad air 2 to manuvering the drone, i have to test more times to see if i has that constantilty choppy video and some lags, before the...
  4. P

    Phantom 3 se litchi

    In litchi what kind of transmission you have, AUTO ? or you have choosen another one?
  5. P

    Does 'RTH' still work with the hacked FCC/CE mode?

    I have already tried my bird was at 965 meters and i lost conection because i was in the mountains, the bird 3 seconds after i lost the video conection it returned home by it self the only thing was i didn't receive no more video image in my ipad with litchi i had to land by manually by my eyes...
  6. P

    Phantom SE picture stabilization problem

    OMG looks like a space station :D
  7. P

    P3SE and Litchie App on IOS...need definitive answer

    Have you restart the application when it is in RTH and the image comes back? I have to test on litchi that when the bird in the next time is already stopped over me to see if it works.
  8. P

    P3SE and Litchie App on IOS...need definitive answer

    Any solution for that? I'm afraid to restart the app in the middle of the flight and see if the image comes back or not...
  9. P

    P3SE and Litchie App on IOS...need definitive answer

    So over the last weekend I was flying 905 meters away from me, I turned the drone back home because I was a little scared to go further and lost connection to the drone (video) the remote was with 98 %, litchi warned me that the bird was in RTH, the video stopped at the place where it lost...
  10. P

    P3SE: no screen / videofeed since the last Litchi update

    Try the ipad, last weekend i fly about more than 3 hours and everything worked fine :)
  11. P

    P3SE: no screen / videofeed since the last Litchi update

    What kind of IPAD do you have? I have an ipad air 2 wi-fi only and i don't have any problemns with licthi and i have all the updates.
  12. P

    Switch to FCC mode in Europe, and fly miles instead of just 300 meters with P3SE

    Copy form the DJI forum "This message will pop up when flying aggressively or in a high wind condition, sometimes if the drone has mounted the accessories which exceed what it would bear will also lead to this result. So if it is possible, avoid these conditions." The wind was strong in the...
  13. P

    Switch to FCC mode in Europe, and fly miles instead of just 300 meters with P3SE

    Im using ipad air 2, i don't have any problem with the litchi, a bit laggy dont know why, trying to switch to 2.4 ghz, using 5 ghz, because of strong wind ( 35 km ) i only tested today about 18 minutes of flight. But i can assure you if you use the MOD dji go to switch to FCC and after that use...
  14. P

    Switch to FCC mode in Europe, and fly miles instead of just 300 meters with P3SE

    Is any way to switch to 2.4 ghz? I cant switch to 5 to 2.4 i choose any channel and it say it will restart but i need to turn off the remote and turn on again and always is set to 5 ghz. Thanks