Recent content by paulsluxmd

Tough crash!! This is what I mean as far as elevation. I'm not worried about the 20 or 30 feet difference that is possibly from the limits of the barometer. This is the P3 Flytrex - note the MAX ALT and MAX ASCENT are the same denoting Ground Level as the reference point. This is my P2...

I'm curious if your P 2 Flytrex shows your starting altitude at your current elevation above sea level or ground level? My P 2 Flytrex shows starting altitude above sea level, but my P 3 Flytrex shows starting level at ground level. Anyone else seeing the same??

H2O Wireless 3 in 1 SIM card. It's free on Amazon or $10 at Best Buy. You then activate by phone and buy the $10 for 90 day minute option online. That gives you plenty of data for what you need.

That's ingesting because both maps shown are directly from the Flytrex Live website data and map that the connects from the 2 units. Do you think the new Flytrex Live Plus isnt able to detect sea level??

I live at 600 feet above sea level. I have a Phantom 2 Plus and a Phantom 3 and have noticed that the Phantom 2 Plus flights always start at altitude above sea level, while the Phantom 3 makes it starting point at ground level. These are Flytrex maps but I have confirmed on the Phantom 3 log...

I think it must be a problem with your Flytrex unit. Too bad we do not have the ability to reinstall the firmware on the Flytrex and see if that would clear the problem. I tend to get obsessed with these types of problems!! Oh well, at least it keeps us off the streets!!

I cleared the red light problem and the Flytrex now connects properly by doing the following: Bought a new SIM card Downgraded firmware to v1.32 and then upgrade again to v1.4.0010 both with the Flytrex plugged in. IMU full calibration So far (maybe 10 times) I have restarted the Phantom and...

I have two problems with my new Flytrex Live Plus for my Phantom 3. It always shows my starting altitude at sea level, even though I am 600 feet above sea level. Also, the unit stays on the 2 red LEDs unless I unplug the 4 pin connector and replug after the Phantom is powered on and then it...

It's the Jewish holidays in Israel this week and most people take off until Thursday. After installation with the CAN BUS external cables and new Flytrex, I had a similar issue in that the 2 red lights would not go off and the Flytrex unit would not initialize on power up of the drone. I began...

I also received mine on 9/17 and I installed and it worked great. My problem is that I when ordered the cable and unit there wasn't any option to order the mounting bracket. I just assumed it came with it. I modified a Shapeways mounting bracket that I had tried on my Phantom 2 plus and it...

I got my new Flytrex for the Phantom 3 Professional yesterday. It shipped on September 8 and I paid the $25 expedited fee. The Flytrex unit and connection cable came, BUT THE EXTERNAL PLASTIC MOUNTING BRACKET WAS MISSING!! I went ahead and connected the external cables and inserted the SIM card...

I would email Tony ([email protected]) who owns the company and has always replied to me quickly with any problems I have had. I get 6000 feet routinely with the set up you have. Good luck and he will walk you through it!!

They are suspending downloads until they come up with a new, improved product. Why would a company that has a successful product do this?? Not sure what to make of this, but I wonder if they are shutting down?? Anybody have any information?? I installed the new Flytrex Live 3G and it works...

After successfully upgrade of the new controller to my Phantom 2 Vision plus, I ordered one for a friend. Out of the box, all was normal with the green LED lights coming on when powering up. In the middle of the firmware update, suddenly all lights went off and the computer said no device...