Recent content by ninja_plys

Thank you so much for all your help i am so gratefull. Ive been wondering about your name, theres a double meaning to it in this forum, someone who damages quadcopters or does something to damaged quadcopters and ofc quaddamage first introduced in Quake 1!! God i loved that game :). So why the...

Ok 2.4.2 works with the new phone in developer mode aswell. FInaly, just had to sell my soul to DJI then everything is allright.

Okay i just got it working. I installed DJI go 2.4.2 on my old phone. When i turned on USB developer mode and reconnected the phone to the drone it worked. I can go play tomorrow i cant wait. Ill try developer mode on for new phone and see if that works too.

I cant get into the pins with my multimeter. Can i manually up/down grade to 1.2.7 and make sure everything is that version? The kernel is newer then 1.2.8 but i guess there is more then a kernel in their updates right?

I did kill-server and insmod no difference same reaction when i connect the Phone. Looking through the librarys on the device here is my list there is no /version anywhere i can find: root@Dji-Pro:/# ls bin dev etc home lib mnt opt proc sbin sys tmp usr var...

@quaddamage Reading through a 6 years old post where you also helped someone with something that looked like my initial problem. You said to extract uimage from the update file. I just used the file that went along with: sfh_DM36x.exe Could my current problem be that im not using a kernel from...

Ok i just ran into this thread showing the exact same problem as i have. https://github.com/o-gs/dji-firmware-tools/issues/358 Ofcourse its closed without a solution.

This is the output when i off the rotors on the drone. Funny thing is it doesnt get any output on putty when i turn them on. Proberbly doesnt help but might be interresting anyhow. Turn off DummyRead68013 0.000000kb DummyRead68013 0.000000kb DummyRead68013 14.822734kb DummyRead68013...

As soon as i connect my phone to the board i get this message. And it repeats itself alot faster then dummyread conn failed, type:0, port:22346 conn failed, type:0, port:22345 conn failed, type:0, port:22346 conn failed, type:0, port:22345 [ 90.980000] usb 1-1.1: USB disconnect, address 4...

Im actually trying older software from apkmirror. See if this is a way. Yes they continue. Could i controll the drone if they Arent connected? So i should keep the ttl on the board as i connect it to the remote and power it up? Does this mean i should disconnect gnd and 5v cause the rc has...

Thank you for giving me the understanding of the log. The bad blocks table was the only thing i could see as an error. How do i proceed from here? The usb port works since i could update firmware. The boot seems to work but i dont get a connection to the controller. Should i continue to...

I reflashed the kernel manually, sent the uimage successfull after reboot this is my new error. Same thing cant connect to phone, still able to controll drone. Whats up with the bad blocks isnt that a problem? ▒▒▒DM36x initialization passed! UBL Product Vesion ...

To reflash the kernel manually do i need the jumper cable from 3,3v or is that not needed ? Since im trying to interrupt the bootloader it shouldnt be needed right?

I did the USB firmware update starting from the lowest available firmware on phantomhelp and it worked with 1.2.7 guess i had 1.1.9 or something. It still connect fine with the drone able to start the rotors and controll gimball. Just no phone connection on either Samsung S5 nor my newer phone...

And thats the usb firmware update you refer to right? What version would your recommend?