Recent content by Nazag

Take the props off when servicing. Good luck.

All normal. It's an auto takeoff thing. I don't like it much, but it works ok. Just take care when taking off that you don't tip too far forward or backwards etc, particularly when heavy. once in the air everything is normal. I love the self centring throttle though. I got used to that very...

Hi, not sure if this helps, but it sounds just like a problem a few of us have had. New phantoms must be set to d-bus, otherwise they will just sit there and flash yellow. Also, check in the battery compartment because in the newer models you can access the rx button from inside that compartment...

Hi - a few people, including me have had this problem with new phantoms. Basically, you need to change your settings in the software from ppm to d-bus on the new ones, despite what all the instructions say. I had exact same problem and this fixed it in an instant and DJI (eventually) confirmed...

Hi - a few people, including me have had this problem with new phantoms. Read this post for answers: viewtopic.php?f=5&t=2718&start=10 Hope it helps, Nazag

Hi. I have a new phantom as well and had similar problems. In the end, DJI told me the new version (with the self centering throttle stick) must be set to d-bus to operate, despite what all manuals say. This fixed everything for me and it's now operating perfectly. See the last posts on this...

I ended up doing exactly the same and it now works perfectly. Thanks for all the suggestions. I have also noticed with this model that there are no wires connected to the aux power outputs on the circuit board. Not sure if it's just mine. I guess I'll just solder one on myself. At least I can...

Thanks again.

Hi. Thanks for that. I just tried a couple of times and again just yellow flashing. Have reset, re calibrated, updated ... so many times I've lost count. Thanks for your suggestion. Everything's worth a try. My distributor is contacting Dji today so I'll let anyone else having the same problem...

Thanks for the suggestion. I've just tried it a few times and no change though. I'd be interested if anybody else has had any luck. Thanks again for letting me know what worked for you.

I'm having exactly the same issue, also with the stock controller. My phantom is brand new and will not get past the constant flashing yellow light. I've tried all suggestions and have trawled the net for answers, but with no luck. Like you, the tx is binded to the unit (I can test with the red...