Re: How to setup Phantom 2 FPV with iOSD mini but without gi
These 2 cables will do it:
http://www.dpcav.com/xcart/Video-Cable-for-DJI-iOSD-Mini-ImmersionRC-or-FatShark-vTx-FatShark-Camera.html - connects fatshark fpv cam to iosd to tx
http://www.amazon.com/gp/product/B00LDX65OS - connects...
I have tried both airblades and FPVLR.
Both are great antennas. You pay more for FPVLR, but the quality is better.
If you have the additional funds, I would go with FPVLR.
My $0.02
Thanks for the reply's!
Next time this happens I will make sure to toggle S1 to atti and let it sit for a second.. Most likely I did not do this appropriately.
So I was flying FPV about 800m out yesterday and all the sudden lost the ability to control the drone. I still had clear video feed through my goggles and on the bottom left the iOSD displayed "gohome" (or something close to this, I can't remember exactly).. I'm assuming the short distance...
Your post doesn't seem specific enough..
If you currently have a P2, H3-3D, and Immersion RC vTX working with a Black Pearl Monitor, everything is hooked up already on your phantom.. All you need to do is power up the Predators and you should be good to go.. ?
Check it out, let me know what you think. I'm more into flying / exploring FPV and less so interested in recording stabilized HD video, so I didn't want a gimbal / gopro.
https://www.youtube.com/watch?v=-wrqmOvP30o
Parts List:
-Phantom 2 V3 (non-vision)
-Fatshark Dominator V2
-Immersion RC...
Check it out, let me know what you think. I'm more into flying / exploring FPV and less so interested in recording stabilized HD video, so I didn't want a gimbal / gopro.
https://www.youtube.com/watch?v=-wrqmOvP30o
Parts List:
-Phantom 2 V3 (non-vision)
-Fatshark Dominator V2
-Immersion RC...
I have a p2 V3 (new lipo controller with scrolling wheel for channel 7).
I do NOT have a gimball, however want to use channel 7 to control a servo. Anyone know if this is possible and help configuring this??
Anyone know if its possible to hook up the "tilt" servo from a fatshark pan / tilt camera mount like this http://www.banggood.com/Fatshark-FPV-Pan-Tilt-Mount-with-9g-Servo-180-Degree-Gimbal-p-953567.html to the phantom 2 V3 using the 7th channel (x1) so it is controlled by the scroll wheel of a...
you probably got the predator V2, I don't think anyone is selling the V1 anymore.
The only other thing you need is an iOSD. If you want a "plug and play" cable to hook everything up, I don't think they make one unless you have an iOSD connected..
something like this...
Anyone know if I would have 2 free channels by installing a R6208SB rx on my P2?
I want to install pan / tilt head tracking mount and need 2 free channels for servo's.
Thanks.
Setup:
Phantom 2 (non-vision)
ImmersionRC 600mw VTx
iOSD
Fat Shark Attitude V2 Goggles
Standard 600TVL FPV Tuned CMOS that comes with Fat Shark
Anyone know if the basic Fatshark Pan / Tilt mount would work with head tracking if I switched to a 8FG TX and installed the R6208SB on the Phantom?
Tell me if you see a problem with this setup:
http://www.dpcav.com/xcart/Video-Cable-DJI-iOSD-Mini-ImmersionRC-FatShark-vTx-GoPro-Hero3.html - this connects the iOSD and GoPro to the TX (completely independent of the Phantom 2)
http://www.amazon.com/gp/product/B00LDX65OS - ONLY connect to the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.