Recent content by MaxS

Indeed an idiot , wonder what he flew with ? Video quality seems really bad in any case !

Or use Autopilot . I've got bot Litchi and Autopilot. I agree that DJI frequent updates make one angry or pissed off !

I would assume that if you have set the mission to RTH in the event of Action Finished (se attached image) would activate the RTH function? But this I have not tested. I also have in my mind that Litchi can complete the mission even when the RC connection is lost. I use primarily Autopilot were...

Ok, now we seem to be on track in the discussion. The original problem I was referring to was indeed the Autopilot mission crashes. I do know that the Autopilot cannot execute a RTH on a mission software failure . I have on these unfortunate occasions used the physical RTH button on the...

The problem is however, that the 3.9 app suddenly crashes in the middle of a Mission and then the mission is aborted . At this point, even if I have selected RTH after completed mission, the drone will not RTH but hover on the mission exit point as it does not get the mission completed signal. I...

There is no RTH setting possibility on Lost Connection in version 3.9 as I can see . Only End Mission or Continue Mission. If you choose Continue Mission a lot of functions will be disabled as in the second screen shot

That is not 100% correct to my understanding as it depends on how you have set the mission settings for lost connection. You may choose to Finnish the mission and some other functions are then disabled, or the mission is aborted and the drone Hovers on the mission exit location. Then one needs...

You will not have it returning home without pushing the RTH button on your controller. The Autopilot App has the alternative to RTH when the mission has finished. Otherwise it will hover on the spot it excited !

Yes, I'm using both RAW + JPG. My RAW images show as .dng

Do you see any image resolution settings in the app ? I saw some youtube videos and using the app on an iPhone revealed a bunch of image resolution settings to choose . I did not find any such ! Perhaps the video was related to an older app version ?

Looking carefully on the images from the SD card, I see that these are sometimes 4000 x 3000 and sometimes 4000 x 2550

I'm using the lastest iOS app ! Indeed I now see a diffrence when loading them directly from the SD card, then they turn up as 12Mpix !

The Thing is that once I change to 4:3 ratio, the resolution dropps to 960 X 720 !

I've got the P3 Advanced, and it seems my photos comes out as 3992 x 2242 pix =ca 8.9 Mpix. The sensor should be able to 12 Mpix images, but I cannot find any place in the software to get this setting changed . Any suggestions ?

Hi , just as a curiosity . I flew my P3A the 6th of January in Finland at -27 °C for ca 8 minutes . I was a bit concerned about this extreme ambient temperature , but it worked fine. I had my iPad with a back cover on it, to possibly isolate it from the cold. MyP3 battery indicator still after...