Recent content by marphtwo

OK, I will start up a new one maybe then :)

Hats to you, bnut Im not looking to add a $2,000 - $10,000 add on. I dont need military grade IR. I just want to fly at night and integrate with the onboard phantom vTX.

You can do a google search for FPV IR or FPV Night Vision but here is a couple: SONY SUPER HAD 600TVL FPV WITH IR BLOCK CAMERA 2.8MM LENS Emax Night Vision IR 1/3-inch COMS PAL/NTSC FPV Video Camera

Did you use a spectrum analyzer to verify? I doubt that both video and control are on the same frequency. Can anyone else verify?

I think he's referring to you need an N-number to fly it in another country....but really who cares. " Traditional Aircraft Registration is available under 14 CFR Part 47 for: Unmanned Aircraft that weigh 55 pounds or more, sUA that need N-number registration to operate internationally, sUA...

Hey guys, Take a look the 2 green arrows at the bottom in this picture. Can anyone tell me which antenna port is for the 2.4GHz RC TX and which is for the Video RX (5.8GHZ?)

I think Im looking for the same thing as Airbornemedic. I want to integrate into the Phantom Video TX itself so I can view FPV on the existing software/app on the ground. I can buy a mini FLIR for about $60. I dont see a point in adding weight for a separate video TX for a second on board camera.

I am hearing reports on other threads they are not. What evidence are you going off of?

Yes sir. I have the stock antennas now and can only get out about 3000 ft horizontal at around 350 ft altitude (of course distance is better at 700 - 1000 ft altitude, but I am trying to at least stay semi legal under 400 ft and under the radar). Probably due to all the other trees homes 2.4 Ghz...

Thanks, but Ive already investigated signal loss and what cable to use. I have found numerous users that have success, and I am replicating their cable/antenna setup. What I am asking here is are the DBS ITELITE SMA Outputs for Port 1 and Port 2 broken down to one RC TX and one Video RX on the...

Hello DBS/everyone, Quick question: On the DBS ITELITE Antenna setup. for the SMA Port 1 and Port 2, are those broken down into RC TX and Video RX possibly? The reason I ask is that I live in a remote area, and I want to put antennas on my roof with some 50 ohm cable to a yagi for the RC TX...

Hello DBS/everyone, Quick question: On the DBS ITELITE Antenna setup. for the SMA Port 1 and Port 2, are those broken down into RC TX and Video RX possibly? The reason I ask is that I live in a remote area, and I want to put antennas on my roof with some 50 ohm cable to a yagi for the RC TX...