Recent content by leegreen13

For some reason the Rinex format of the obs file created by the P4RTK does not work with Magnet Tools (wrong format), also it does not contain the NAV file. RTKconv with create the proper RINEX3.02 format and NAV file. Yes, GeoAdjust will calc the proper camera position after post-processing...

DJI just released Terra software that appears to be their solution to PPK post-processing. I use two Bases for a closed triangle to each drone point. This creates a mathematical closure and verification to ensure accuracy. If you have a good NTRIP network and cell connection a the site, then...

Yes. Creating the flight boundary manually is a bit clunky and unresponsive at times with DJI GS. Seems to take a quick double tap, or even triple tap to add the vertices. I find it works much better by creating the KML boundary in Google Earth. Then copy this to the KML folder on the SD card...

The true advantage of PPK is the fact that the data will be more precision throughout the entire project. Processing with GCP will limit you to precise data only within the perimeter of the network of your control points. Data outside this area, and extreme high and low areas with no GCP's will...

Wondering how do think these cracks are being created? What are you landing on? Do you use Return to Home and auto landing? Do you hand catch the air craft?

I'm a couple hours east of you, near Utica, NY But I do a lot of work in Rochester and Buffalo area. DJI Phanton 4 and DJI Phantom 4 Pro sUAS Commercial Operator with FAA Part 107

If you are using Maps Made Easy for commercial projects, be certain your clients know the MME terms of service. Basically MME reserves all writes to use or redistribute the content. "You retain ownership of all content that You contribute to the Services, but in order to provide the Services...

Don, The address for my house differs from the coordinates by a quarter mile (1320ft). The coordinates from the Trackimo correctly shows my location. When ever someone uses GPS to navigate to my house, they always miss the driveway, the houses a quite far apart and the address has always been...

Don, I believe it is displaying the GPS coordinates from the Trackimo, and the address looked up by Google Amps.

Donald, This is for the Trackimo Android app on Droid Turbo 2 w/ Android v7.0 1). In Trackimo tap on the marker showing your last location. A large pop-up shows the address, time and date. 2). Now look at the tiny icons that show up in the lower right corner. Select the Google Maps icon. It...

No need to force these prop guards on. They snap on easy to both drones. Appears I am using a different type, not OEM. I am using SKYREAT Snap On/off Prop Guards Guard-Quick Release Propeller Protector for DJI Phantom 4 Quadcopter White & Red. Purchased here...

My Phantom 4 prop guards purchased 6 months ago, work just fine on my Phantom 4 Pro.

All three will perform nearly the same. You have only spec'd different drives sizes, but not types, and slightly different graphics cards. The CPU is only a 4 core, and the drives you have chosen may only be SSD SATA. Be sure to get SSD M.2 PCIe drives which are 5x faster than SSD SATA. You will...

Upload or hand enter coordinates of the waypoint(s) to DJI GS or Litchi, then have to drone fly to that waypoint. Or inverse from the launch position to the waypoint position. This will give you an azimuth and distance. Now use DJI Go 4 app and navigate that direction and distance, it is...

Can Litchi create flight mission like Pix4Capture and Map Pilot? Would like to create polyline of the coverage, then align the flight path, set the AGL, set the front and side percentage of photo overlaps (such as 75%). The app should then calc the pixel size, acreage, batteries number of needed...