Recent content by Kevinski

There is a reason that the Phantom 2 Vision TX/RX runs at 5.8 ghz, oh and the camera runs at 2.4 using good old wifi

This appeared yesterday... Firmware Updates on July 01 Overview: a) Central board firmware updated to: v1.0.1.31. Major New Features: a) Fixed iOSD compatibility issues. Special Note: a) Ensure main controller firmware has been updated to the latest version (v3.04) before you start to update...

You have two different things, The ground station as I mentioned works fine, the BTU that comes with that connects to the ground side not the Phantom 2. The BTU as a standalone and connected to the P2 will not work, fine on true Naza V2 controllers. Cheers, Kev

They will all fit, but the BTU won't work on the P2. I don't know if they will ever update the firmware to fix it. You can add the Bluetooth iPad ground station but that won't let you change your Naza settings in flight. Cheers, Kev

Yes if you mean the cable from the Phantom to the gimbal it's available in the pack; Product Code: DJICAB3 Description: DJI Phantom 2 Cable Pack Quadcopters.co.uk in the UK stock them. Thanks, Kev

Could this have been a geofence issue? What were the limits and distance from home? attitude mode will allow you to fly outside the geofence. Thanks, Kev

I would bet you have the top shell on wrong, check the alignment where the directional stickers go. Kev

Guys, You really do not want to have your gopro wifi turned on, unless you are using a 5.8 TX. Big chance of causing a flyaway. Cheers, Kev

Plus 1 on that fix

I'm interested why you are replacing the camera, crash damage? Thanks, Kev

Have you fitted the anti interference board? Thanks, Kev

Thank you

Known bug, fixed in v2 firmware. Cheers, Kev

Running 3.02 with no problems on a P2 and a P2V. Just click the don't be afraid check box :D :D :D

Re: This issues is getting me crazy !!! Please i need to res Or keep the throttle above 10%