Recent content by Kaehn

It is required for the DJI SDK to work. Litchi uses the DJI SDK to connect to DJI drones. The DJI SDK uses this permission to identify your mobile device when registering the app with their servers (upon first start). It is not used to actually make calls, but android calls it that way. If you...

Litchi Magic Leash only works with the main Android Litchi app right now. Sorry for the confusion but Apple would not let us mention the word Android in the apple store description. We do plan to add support for it in the main Litchi iOS app though. Currently Android only has one additional mode...

Make sure you are logged in to the same Litchi account in both the Hub and the app (tap in top left corner then Log In)

Actually iOS had exposure settings before Android for the P3S

There has been no changes on our side. Keep in mind the distance between last and first WP must be within 2000m.

It does, but you should never rely on it

For the DJI server check, it's only required the first time after installation, if you are having troubles with your internet connection, restart the app and try again, or try with a different internet connection. Be aware that yesterday DJI had server issues which may be the reason you could...

If you have 1.7.0 beta then there should be a setting called "Front LEDs" in the general settings

How far from the home point was the aircraft when RTH triggered? Yes, we will clarify that in a future build to avoid confusion but it does not affect waypoint missions.

Litchi has all of these

Yes, see Beta - Litchi

In 3.4.0 (Android) / 1.7.0 (iOS) yes, currently in beta, no ETA yet for release.

Make sure you are using latest firmware. Also check DJI Go settings to make sure that beginner mode is off and that multiple flight modes is on.

Litchi does not disable obstacle avoidance. When we tested it, it did not work in waypoint mode even though we had OA enabled, but that was a few firmwares ago. It's possible that now it does work as we had at least one user say it does.

It depends on the firmware, we don't change this setting in Litchi. If the firmware decides it won't be able to complete the mission and go home in time, then you may see the smart RTH trigger. Unfortunately we don't know the calculations that are made for this to trigger.