Thought I would post an update. My GL300b will not work with any other firmware other than 1.9.2. I have tried all of the available download downgrades from using the "long press" app method. All downgrades finish successfully (even in the log file) however upon reboot, the gl300b just...
updated the bird to 1.9.6 . still have the error "Remote Controller Encryption Error, Hardware malfunction. Contact DJI.."
Motors arm. Have not flown
Recap: Still desire to get the remote below 1.6 (aiming for 1.5.8) and the AC at or below 1.7.6.
I can get the AC down, but the Gl300b...
AC version 1.8.0, RC 1.9.2 is working. Motors arm. Still have the encryption error shown in the app. Not sure if that is going to go away once it shows up. Not sure how to proceed to role down to 1.7.6 AC /1.5.8. RC
Sounds like a plan. On version at a time until the AC links with the RC without the errors that prevent arming. If I'm successful, how do you suggest I come back to the desired 1.7.6 (AC) and 1.5.8 (RC)?
Not sure if I understand completely. Lets say I start from scratch and get the AC back to 1.11.2 and the RC at 1.9.2 . Assuming all is good (but I doubt it at this point), I would then walk the AC down one version at a time and check the connection to the RC. At what point and what RC version...
I keep digging and need another life line.
With the AC at 1.7.6 (without the "+"), I attempted to role back the GL300B to 1.5.8. Android DJI Go 2.4.2 was uninstalled as it was not giving me options to upgrade/downgrade the RC (long press the grad cap). The DJI-Go 3.159 was installed and the...
Yes, I understand the mismatch. My intention was to downgrade the gl300b to match the AC. I was under the impression this was possible as I see others have accomplished it.
My goal was to use older firmware on both the RC and AC. I see others have been successful with that. My plan was to walk the AC down one version at a time using the Debug file and then downgrade the RC to be compatible. I was successful in downgrading the AC. I assumed downgrading the RC...
I have similar post on other threads, but have yet to figure out the current downgrading process for a gl300b with the latest firmware v. 1.9.2.
The long press procedure pulls up an update screen on the Android app with a blank pull down screen. Nothing to download. I have put the C1-FW .bin...
Old thread but I see recent activity. Struggling with downgrading the RC. Will the usb wipe.bin file work on a gl300b? If not are there any downgrade options for the 300b.?
That is a great write up for r the gl300A. Still confused about downgrading method for the gl300b as it was indicated the usb method will not work on that model
Can't figure out how to downgrade a gl300b. I have done the debug process with the bird, now trying the controller. Placed the "C1 xx" file on a usb drive, inserted, turned the controller on - nothing happens. Must be doing something wrong but can figure it out
I tried the special button...
If I understand correctly the same firmware bin packages used for the AC work on the RC, correct? Additionally do the same debug file use to downgrade the firmware on the AC work on the RC?
If I want to use 1.07 or 1.06 on the AC, what is the suggested best version for the RC.
I have made some progress, thought I would share
As for the gimbal with no video transmission, I ended up fixing it by removing the cmos module from the camera. I believe resetting this cable did the trick. Years ago I monkied around with this component removing the IR filter from the lens. I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.