Wow, thanks for that!
I used GoPro Editor because it's fairly easy to use. Not the greatest but it works. I kinda like moviemaker but I thought I'd give the GoPro software a try. I started out wanting to make a quick clip and next thing I know I find an epic track and end up using the whole 3...
Thought I was doing pretty good until I saw everyone else's edits... some talented people out there.
I think this is a great example of how democratization of technology is good for mankind.
Anyway here is my sorry attempt at an edit. I got some catching up to do...
You can change the HL reference point as well as the RTH point, so long as Dynamic Home Lock is turned "OFF" in the Vision App, by toggling between CL and HL switch positions 5x or until you see the aft status lights blink green rapidly. This indicates you have programmed a new HL point as well...
Sorry, I'll avoid the acronyms.
- S2 switch is your Intelligent Orientation Control (IOC). This feature must be turned on in the Advanced settings of the Phantom Assistant software.
- You can program a new Home Point in flight as well as set the orientation for the Course Lock feature. The...
RC Assistant calibrates the radio (TX controller). Phantom assistant calibrates the speed controllers to the radio as well as all the other adjustable features in the software. Radio should be calibrated prior to calibrating to the speed controllers.
Re: WiFi - SSID - Module & Repeater - P2V+
Try setting the preview quality back to 320x240 at 15 fps. If that works up it to 30 fps and see if it still works. Have had major issues at 640x480.
I did test Dynamic Home Point and it works perfectly. Ensure you have the latest update for the Vision App. Make sure your GPS feature is ON in your mobile device than activate the Vision app. Once in the app turn on Dynamic Home Point in the settings menu. When Dynamic Home Point is active you...
Ahh, I bet it worked because I just happened to cycle passed the middle and bottom (CL / HL) the right number of times. Thanks for the correct procedure!
So it still works I'm just a moron and was doing the wrong programming sequence. In order to change the Home Point and not the Course Lock direction you have to cycle through all three positions (Off through Home Lock) on the IOC switch 5x. Both Home Lock and RTH /Failsafe features were tested...
Yea, I've had this problem since before the most recent update. Kinda my biggest beef with the PV2+ set up as the GoPro crowd doesn't appear to have this problem. Other than that and the fact that the wireless bridge doesn't support the higher resolution preview quality all too well. Although, I...
Thanks for all of the replies! So just some info from pre-update tests, I was able to effectively change the Home Point (HP) / Return To Home (RTH) using the IOC S2 switch toggling between the "OFF" position and the "Home Lock" position x5. This was confirmed through the rapid blinking of the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.