Recent content by georgefrombc

  1. G

    replaced motors and esc and copter flights in circles during liftoff

    well thanks jason for the information. i will replace the motors as that is the major problem with the quad. thanks again
  2. G

    replaced motors and esc and copter flights in circles during liftoff

    i am starting to think you are right jason. i might just have to replace all the esc. what do you think. i have bought an extra one, do you think i should buy two more and replace them all. the wiring on the motors are the exact for what t motors states. the other thing i am starting to think is...
  3. G

    replaced motors and esc and copter flights in circles during liftoff

    i actually damaged all 4 motors when i put the screws in with no prop guards .the motors would be the 2212 ones and they do have the black dots on the tops for ccw and cw. i am going to try to redo all the updates and an advanced ecm and going to see if it helps at all. thanks again for all the...
  4. G

    replaced motors and esc and copter flights in circles during liftoff

    thanks for all the help and i really apprieciate all the information. jason i keep reading your replies and no i have the t motors and not the original ones. tried to do an upgrade since i had to replace the motors for more power and the guys on youtube said they are one of the best ones to use.
  5. G

    replaced motors and esc and copter flights in circles during liftoff

    i bought the unit used. i am not sure what the motors are as i am looking at one right now and there is no number on them. the t-motors i bought where mn-2214 for the phantom 2. is there somewhere i can find if i have the wrong motors. i am new at this and this is my first quad and still trying...
  6. G

    replaced motors and esc and copter flights in circles during liftoff

    i was adding a black mamba to my copter and forgot to add the prop guards with the longer scews jason. when i added the longer scews without the guards i screwed them to the motors. screwed them all. then i replaced all the motors with t motors and burnt up an esc. been a rought go and i just...
  7. G

    replaced motors and esc and copter flights in circles during liftoff

    I did a compass calibration a few times out one the field. It is really weird because before I changes the montors and esc I did not have any problems at all. I will try again tomorrow and see what happen. hopefully I do not damage anymore props.
  8. G

    replaced motors and esc and copter flights in circles during liftoff

    i replaced my motor and one esc. all the motors turn good but when I go to take off with the copter my phantom 2 goes in circles and crashes. I recalibrated the compass when I made changes also. I have broke a few props now and I am not sure what is happening. pleaseee help. thanks everyone...