Recent content by Gemstone

But in my case, the camera is pointed straight down and the drone is moving horizontally on a grid, taking overlapping images. There is not one subject (green box) being photographed. And as such, there is no angle to the subject as demonstrated in your diagram. The resultant images should be no...

I was using DJI Ground Station Pro and it seemed to do a good job on the 2D pano, with level flight on a grid and the camera pointing straight down, so there should not have been changes to the subject angle. The panos I normally shot are not aerials. See: www.vastphotos.com I was just...

Yes, but less resolution. Given my normal pano workflow uses a camera with a 50 Megapixels sensor and over 600 images per single pano, these drone panos were just an experiment. A mavic with a 12 megapixel camera is hopeless but I want to see how much details I could get if I pushed it to the...

35%. I was shooting as low as possible, 5m, to get as much detail in the final result as possible. Maybe that is a contributing factor to my problems

You seem to be getting better results than I did. I already tried Planar in Autopano Giga (the Mac version looks the same btw) with very poor results. Some quick googling showed lots of folks with the same issue. It seems Autopano Giga (at least in my case and lots of other cases I found)...

Thanks but I already own Autopano Giga and it can't do it. And I'm on a Mac so MS ICE is not really an option.

Hey Traveler - I just did the same last night with a Mavic and low elevation for lots of details. But I can't find anything that will stitch the planar pano. What software did you use?