Recent content by Fordzuki

Fwiw, he got it to work with an iPad mini on an older iOS, and it seems like it is a problem with ios8

My boss just got his vision+ back from dji for repair after a crash, and everything works properly except the pic gallery in the app. He keeps getting a loading screen when trying to access the pics and vids through the app, but if he takes the sd card out of the camera and puts it in his...

You don't take off to set home point you wait for the SECOND set of fast green flashes, indicating home point has been set.

Is there going to be an update for the 1.1.1 that gets rid of tbe and j-hook, or am I just **** out of luck because I don't have a p2?

Is there going to be a compass fix for the p1.1.1?

I am getting ready to add a gimbal to my phantom and would like to know if the aux wires that come out the 4th leg has enough power to run both the gimbal and a 250mw vtx.

No, there is a grey cord in the battery compartment of the phantom, THEN, there is also a grey cord that comes loose in the box that is used to connect the transmitter (controller) to your computer. In order to do this, you need to carefully remove the back cover of the transmitter. In most...

I was searching for a bag or box (wasn't really sure :lol: ) to hold my monitor,rx,battery, and wiring for my fpv setup, and ran across a softside "lunchbox" at walmart for $15 that fit the bill perfectly, and I'm even able to pack 4 phantom batteries, the phantom controller, propwrench, spare...

That one doesn't look like it has a receiver. You'll need a tx (transmitter) to fit to the phantom, then you need an rx (receiver) to receive the signal that the tx is transmitting, and a monitor to watch it on. You'll need a cord to go from camera to tx, and video cord to go from rx to...

You'll need a tx too and a way to power the monitor/rx

Monitor showed up, and after waiting for the rain to stop, I finally got to try it out. I went cheap on the complete package because I'm just using this for my own enjoyment, and couldn't see putting more than the phantoms price into an accessory for it. It works as good as I'd hoped, and better...

I have a few swallows living in the tree in my backyard and they'll come out and fly around with it but never really get closer than 15-20 ft from it. I've managed to get a couple cool still shots of them so I don't do anything to deter them. Crows I could see being more aggressive because of...

I have a 1.1.1 and I didn't like the front to back stability when landing, so I made some skis out of uhmw "cutting board" material I had some strips of. In between the holes is recessed for the zipties to make a smooth surface. THe mobius mount you see I cut out of the gopro mount that came...

If I'm not mistaken, that's saying to watch out for low grade counterfeit batteries.

I could buy more phantom screws, but I'd be perpetuating the problem, as the stock screws are too short to begin with. 2-3 threads is not my idea of full engagement on the landing gear. After pulling those 2 threads with stock screws, I replaced them with longer screws that have full engagement...