Recent content by EspenA

  1. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    Hello all. Been a while since I posted here. First of all, it's clear to me now that most of us have connection problems and only a few seems to have the setup working well (still not sure they have tested it thoroughly enough yet though :)). I have been doing tweaks and tests for the last...
  2. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    vmheta.... Not sure how the GS and P2V+ work together, I mean if the drone will automatically Go Home when it looses connection with the DataLink ground end or not. If not I don't see why you have to close GS at all, it will reconnect coming back. No problem program the WP and send it since it...
  3. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    Hello all. Yes I have finished the job on my P2V+ and the range extender and P2V+ FPV system are now using ch.11 instead of 1 :) Anyways the job was quite easy, following the Linuxkids's guides, and it is really nice having a webGUI on both the range extender and the Phantom, to adjust...
  4. E

    Install OpenWRT WebUI on Repeater/P2V+

    Hi LK. Hmmm you could be right there and that this is not WiFi as the P2V+ uses. Not sure what you mean in your edit there about bluethooth, bit the systems comes with a BTU (Bluethoot adapter) that connects to the DataLink ground station and uses bluethooth to communicate with IPAD and the...
  5. E

    Install OpenWRT WebUI on Repeater/P2V+

    Hi again linuxkid and everyone else. I can happily say that my P2v+ and repeater now uses channel 11 instead of 1 :) And also have a nice webGUI for both of them. Thx. a million linuxkid for the help and guides. My next issue is trying to figure out the dji 2,4G DataLink...
  6. E

    Install OpenWRT WebUI on Repeater/P2V+

    Hi again. U mean the one you linked here http://www.phantompilots.com/viewtopic.php?f=27&t=17704, yep seen it twice already and will open it when I'm going to do the changes :) I'll keep U posted on the progress and how the changes works out with my Datalink (iOS ground) setup ;) Rgds, EspenA.
  7. E

    Install OpenWRT WebUI on Repeater/P2V+

    Hello again linuxkid. Thx for the quick response here! So basically, follow your webgui guide, then your encryption guide. I guess the channel settings are in the same menu area as the encryption part is. I have connected to hidden wifi networks before using this method on my laptop (from...
  8. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    Hello all. Just finished more testing and anyway I place the antennas on the air unit, place the antenna on the ground unit, it is loosing the battle to the range extender on the controller. Even though I got the signals a bit better (iOS Ground app showing 2-3 bars on the signal), it's not...
  9. E

    Install OpenWRT WebUI on Repeater/P2V+

    Hello linuxkid. I to have to commend you on your work here and all the support you are giving to us all! I have several missions in life :), but one of the most pressing ones now is to get my P2V+ work better with my 2,4 Ghz iOS Ground Station. The issue I have now is that when I fly with the...
  10. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    It seems to be a problem when you set the repeater/range extender to another channel, it looses connection to the P2V+ :( EspenA
  11. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    Hehe, you are quite correct wattsn. Did not notice that myself. Correct that tonight. Anyways any suggestions about the issues I have? This is something you don't have an issue with at all? Have you done something with the channels on the 2,4Ghz video system? Normally my DataLink ground...
  12. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    My setup is at least very close to wattsn, I can play around with the placement of them a bit more, but think the gaining might be minimal doing that. EspenA.
  13. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    Hello PhantomRock. A really good question, no I have not done anything with the channels on my P2V+ or the DataLink. Can you do that (if this tread says something about it; i have missed it sry,)? And how do you do it? Do you only do it on the P2V+ or both P2V+ and DataLink? Edit: Found this...
  14. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    Well did more testing tonight and got my first signs of trouble in paradise. I could have had the same problems yesterday, but not sure I looked closely enough. My problem is what I was afraid of and that is a 2,4Ghz problem. The problem for me at least is that when using video together with the...
  15. E

    P2V+, Data Link and Ground Station - WORKS!!!!!

    Hi all. Well finished my setup yesterday (no pictures yet) and after first using the CAN module inside the body, I decided to skip it an solder the CAN bus cable and IC cable (flat cable) instead (much cleaner install). Got confused by your picture earlier here wattsn (depends how you look at...