Recent content by Espen Kalland

I replaced the right ESC board, and the issue was finally resolved.

I had to desolder all motors and indicator lights, removed all the old solder and added new solder with flux.

Thanks for the reply! The ribbon cables has been unplugged and re-plugged several times. I think i'm gonna try swapping the right ESC board.

Only 50 degrees celcius, not harmful at all. It was just to make all the water evaporate.

Hi guys, So i´m having these two errors (picture) Any idea on what causes the problem? I have tried a full factory reset and latest software re-install. Worth to be mentioned is that the drone has been having a rough summer.. First off i hit a flagpole (the only one within kilometers), this...

Hi again! I am bringing this post back up again since i have some hopes on making the drone fly again. The pond incident is probably resolved, thanks to immediate action after it was submerged. At this point i have replaced the shell, and currently waiting for spare part 3 (Power distribution...

Sorry for late reply, anyways.. i think you are on to something there, and i ordered a new shell probably within 5minutes after the crash. The new shell is expected to arrive tomorrow, and i´ll start disassembling and re-assembling the P4 right away. BUT, i do have another issue that bothers...

Everything looks normal besides the one propeller arm. i posted some images to my google drive for you to see. dji

Hey guys, So i just needed about two full weeks with my new P4 to crash into a flagpole (the only one within a hundred miles) The shell is slightly damaged, but everything is where it should be. The last flights has given me error messages like; Battery error, voltage critically low It is the...