Recent content by daveloves

I haven't had a phantom drone for a while but have a Mavic Pro which discharges the battery automatically but as with most batteries I am pretty sure it's around 40%. They sell a phantom battery discharger that puts your battery where it should be for storage. Hope that helps.

When you take the shell off next time, you need to take a closer look at all the connections and inspect all components carefully. Also could have damaged the GPS but would definitely replace the antenna. Beat of luck

Sure that you have gps trouble, orange should be blue, at least on a standard gps’s I mount on regular quads I build. Sounds like a trouble perhaps caused by damaged compass cable. Start there. Best of luck

Here is a complete set of carbon fiber propellers that will fit, unused, new. 9.5 If your interested let me know and will either list on ebay or can sell them directly Happy New and Happy Flying

I will try to remember later tonight to take some pics of what I have. Also have some carbon fiber props. They are all Non self locking.

I have a few sets brand new from when I had a P1 but will have to check but don’t think they are keyed but they did work for mine

Make sure to use the right length screws. One for guards are to long without them mounted. Good luck

Not sure what you paid for the phantom one, but consider that plus the amount of money you have to put into the remaining items to get to where you want. Also consider the amount of flight time with the phantom 1 is about eight minutes, take the flight time is the amount of money so you might...

I don’t think that camera will work with a P1 but my thought would be use a GoPro as best choice, however I am an expert. Not sure their are the proper connections for a P2V camera. Best of luck on your project.

By the sound of what happens I would try a replacement gps. As also it does not look normal. That's just my opinion but I am no expert.

well it's possible someone may have changed the motors and maybe they didn't put them in the right. I suggest just mounting up, put it together for a turn it on slowly and see how they go. Apply some throttle in short bursts to visually see how all the props are turning, making sure they go...

Black dot on motor is CW

They should work fine, check out a few videos on YouTube on "how to fly P1 and on the controller as well since it will help out. make sure to look at videos on how to calibrate a phantom as well. Once calibrated always make sure you have a good GPS position and the light indicators will flash...

Can grads on your purchase, just order some phantom one propellers. They're good for starters they have built in prop adapter made on the propeller. The other part you're talking about something sticking down with two end pieces you'd have to post a picture would be very helpful. Not sure what...

Hi, not sure on the goggles you refer to but make sure that the if the Phantom is 5.8ghz the camera transmitter is not the same, otherwise you'll have serious problems. That's a good start.