Recent content by Dalite

  1. D

    Runaway phantom

    I also thought it had been addressed. However, the NAZA truly doesn't know when it is in flight, and if RAP is enabled and it sees a situation where it thinks it is in flight at a hover (no change in motor speed) and seen no directional commands in a given time frame, it assumes radio comms are...
  2. D

    Runaway phantom

    I thought the RAP firmware had been corrected to eliminate unpiloted launch. Here is a discussion where the warning was made by one of the most experienced RC Heli pilots in the hobby. http://www.phantompilots.com/viewtopic.php?f=4&t=7231 For background only. The warning post was...
  3. D

    Can I use this on my fc40 to control my camera tilt with naz

    Re: Can I use this on my fc40 to control my camera tilt with Connect to computer, enable gimbal, set range -100 to 100 Open Phantom, run servo wire for tilt to Pitch output of NAZA (I believe it is F2) Set the tilt pot on the controller to mid point and power controller up Briefly power up...
  4. D

    If you have sold a RE-500 Extender...

    Well, it's not a big enough issue to drag out names, but it was a disappointment. I would rather find the original owner, as I think they have the info. I am not sure the seller was aware that it had been changed. All in all, it has been a leaning experience. I haven't used my Phantoms in...
  5. D

    If you have sold a RE-500 Extender...

    That is correct. The seller would not provide the info. I gave up requesting the login/password after months of waiting. In this case it is ssh to 192.168.1.2. I tried a number of addresses and ports that showed up using netstat. I asked around on different threads where the adding of luci...
  6. D

    If you have sold a RE-500 Extender...

    You can login with a computer using the standard login/password that they are all shipped with. It has a graphical interface that allows you to make changes to the open-WRT routine running in the small embedded OS. But there is no wired Ethernet port ( which coud be used to reset the password)...
  7. D

    If you have sold a RE-500 Extender...

    I bought some Phantom parts from a listing here last early last year. The main thing I wanted was the RE-500 to see if I could get it to work with a FC-40 . The Range Extender has had it's password changed. I have tried for months to get the seller to give me the password, or put me in touch...
  8. D

    Isn't it time to embrace the word "drone?"

    Or, you could just call it a 4 blade Baby Killer and vastly improve the image. I have a theory that it may be more effective to not try to put out the fire of negative press with the flamible liquid of despised connotations. I guess that makes me a Bonehead. For those who haven't been...
  9. D

    Hard to control

    Make sure you do the IMU calibration on a level surface that has no metal. Whatever level the Phantom is resting during the IMU calibration is treated by the NAZA as the goal to meet in flight. In order to move in any direction, one set of motors will spin faster than the other pair. This...
  10. D

    Wanted: Range Extender mount / 2.4 GHz RX antennas

    Hoping to find the mounting hardware for the Vision Range Extender. Also looking for the Antenna assemblies for a P1.1.1 (2.4 GHz ) receiver.
  11. D

    BE AWARE - No Wi-Fi connection with 3.04

    Tincup, the wifi dropping on the Vision after updating the app for waypoints may be as simple as the app setting a flag to restrict wifi connection to the extender until it downloads the maps for your area. If that flag is never reset, it may result in the wifi not being allowed to maintain...
  12. D

    BE AWARE - No Wi-Fi connection with 3.04

    This is only a guess about the current problems with P2V after 3.04. If the same controller firmware (3.04) is used on both the P2V and P2V+, when it automatically updates the main board firmware through the Assistant, an incompatibility is introduced. The P2V has an air cooled and remote...
  13. D

    Install OpenWRT WebUI on Repeater/P2V+

    No need to apologize. I already tried everything I knew, but no luck. A while back, I did a DD-WRT configuration to make an XBox 360 see a wireless access point as an Ethernet connection, and may try to do the same here. The config makes the wireless access point look like an Ethernet wired...
  14. D

    Install OpenWRT WebUI on Repeater/P2V+

    Slightly off- topic, but.... Is there any way to reset the root password on the range extender via wifi connection? I bought a used range extender and a previous owner had apparently reset the password. I see procedures for using an Ethernet connection, but nothing that can be done with a...
  15. D

    BE AWARE - No Wi-Fi connection with 3.04

    I think this will ultimately be a battle of firmware updates; and ultimately isolated as a P2V+ routine that is not stable on a P2V. The particular firmware update I would suspect is the main board update that is forced through assistant working against a FC200 camera runningt the older...