Recent content by berndgill

I added today a Payload Bridge Version for the Phantom 4 Pro in Shapeways and in Thingiverse as several people asked me for it. DJI Phantom 4 Pro Payload Bridge by berndgill on Shapeways Below the picture shows the Bridge on a Phantom 4. Using the using the dampers as described in above link...

Could you print it sucessfully?

I use a ring of Belcro to secure the bridge, even though it sticks quite tight on the phantom.

Phantom 3 Payload Bridge Phantom 3 Payload Bridge by bgill

So here is the STL file for the Phantom 3 Payload Bridge. Phantom 3 Payload Bridge by bgill As the camera is hanging lower, I had to put the bridge lower, than with the Phantom 4. Therefore the arms are thinner, but that should be sufficient. As I do not have a Phantom 3 someone has to print it...

This is a nice and easy setup. But it bares one problem especially for 360 cameras: Half of your picture will be covered by the drone itself, as the camera is hanging directly below the drone. On the other side the advantage is that the forces caused by the lever action are smaller and flying...

Cool this allows me to make a P3 version. Someone will have to print it, test it and provide feedback.

As I do not have a Samsung phone or tablet, I use AutoPano to stich. I made this camera holder as a generic one fitting all cameras, also the Nikon Keymission 360 the Kodak cameras, etc. So if you don't need dampers you can equally teach the camera directly to the platform.

I don't have a P3P, but if you sent me the diameter from the bottom bars of the Landing gear and the distance (Midpoint to Midpoint) I can adjust the design of the Payload Bridge.

I was flying with payload at - 10 C with no problem. Here you find the footage of that flight Mounting the Gear 360 Camera to a Phantom

Yes, if you have a Smartphone and Google cardboard glasses, you can even watch that video in your VR glasses. You just click on the glasses icon in the youtube browser. For sure it also works with all the other frames you can get. So no additional software needed.

Sorry I forgot the video Link I start and land out of my hand. I also thought of a takeoff pad, but then you always need to carry it with you.

I recently bought a Gear 360 Camera to play around. Soon it was clear that it would be cool to mount it to my Phantom 4 Here is the first test video. To watch it you need a 360 enabled browser (e.g. Chrome) - and you need to put in youtube settings the resolution to 4K. This is how my setup...

Hi here is my first test with a Samsung Gear 360 To watch it you need a 360 enabled browser (e.g. Chrome) - and you need to put in youtube settings the resolution to 4K. This is how my setup looks. You can easily replace the Samsung with the Nikon Keymission. The setup I designed you...

Here is how you create a 360 video. To watch it you need a 360 enabled browser (e.g. Chrome) - and you need to put in youtube settings the resolution to 4K. This is how my setup looks: The setup I designed you can find on Shape ways https://www.shapeways.com/shops/bgill or on...