Recent content by Az Wing

After the last firmware update, the photo quality on the P3P also changed as shown in the images. In flight or on the ground, switching back and forth between photo and video reveals clear images in video and a very visible degradation of the same image in photo. Has anyone come up with a fix. I...

After the last firmware update, the photo quality on the P3P also changed as shown in the images. In flight or on the ground, switching back and forth between photo and video reveals clear images in video and a very visible degradation of the same image in photo. Has anyone come up with a fix. I...

Thanks for your reply. So far, I've spoken with two "supervisors" at DJI. The first promised to help, but that was the last I heard from him. It was obvious the second was reading from a script. Twice he asked me to mail the Phantom and controller to DJI for troubleshooting; even though he'd...

Does anyone recall if DJI provided a realistic explanation for the "Mobile device CPU fully loaded issue caused by the last update? The response I received, so far, was useless. Thanks.

Has anyone come up with a fix, or final explanation for the "mobile device cpu fully loaded" prompt and resulting video issues after the latest Go App update? My Phantom was working as it should just prior to the update. Now, I also have the prompt and video issue described by many others...

Purchased a P3P in Dec of 2015. Returned it (under warranty) to DJI in June due to stress cracks in a motor mount screw hole. No crashes; no hard landings, and everything worked. To my surprise, DJI repaired and returned the P3P within two weeks, free of charge. Then the nightmare began. The RC...

Noticed stress cracks on one arm during a preflight yesterday. Never experienced a hard landing or crash. E-mailed DJI but have not received a response, yet. The P3P is only six months old. How is DJI handling returns/exchanges for this on-going issue these days? I read in the warranty info that...

Hi James, Yes, I believe it's the firmware. Late last year, I discovered the issue soon after purchasing the Phantom and upgrading the firmware. I thought it was the camera, and after contacting DJI was given the option to make an exchange. However the second Phantom produced the same HDR...

Thanks. Great Info! I've learned much. :) An operating range (-10 C to 40 C) appears in two sections of the Ops Specs. Under Aircraft and Intelligent Flight Battery. Another person had suggested the temp range is the ambient temp range for flight. I wasn't sure since it appears separately under...

That's a good question. It's my understanding that the Flight Battery Operating range mentioned in the manual is directed to the battery temperature indication in the Go App (the actual operating temp of the battery). Otherwise, there would be an operating temperature range for the aircraft...

Thanks for your input. A little concerned about the operating range in the manual and the 40 C max I'm seeing rather easily. I completely agree about hovering. I did for a while but then attempted to bring down the temp via fast flight. The temps did not decrease. Inquired to DJI about the...

Is anyone else in the PHX area, or an area with similar temps, exceeding the 40 C flight battery operating temp range? Was out this evening for about 10 minutes in 65 degree F (18 C) Wx and the flight battery temp went to 41 C. I suspect it would have gone higher. All of my batteries will do the...

Does it then make sense that the "20 charge/discharge cycles" recommendation in the manual for discharging the battery down to 8% (for extended life) needs to be completed when the Go App shows 20 charges on the battery page? The goal is to know if the Go App "charges" are the guideline for when...

The Flight Battery Manual recommends a complete discharge/charge every 20 battery cycles. What constitutes a battery cycle? Flying the battery to 30% or lower, then recharging? Or is a battery cycle calculated within the Intelligent Flight Battery firmware? Within the Go App's battery section...