Recent content by Alexdroner

Sent from my SM-G9350 using PhantomPilots mobile app

So is it just seating there level sharking or tilted at an angled level sharking. If it is with an angle, it is very common for p4p, if it is flat level it is abnormal definitely, actually both are abnormal, just with it only happen when tilted, I have a solution, it is related to the vibration...

Does anyone try if the p4 polar pro gimbal lock it p4p gimbal? Sent from my SM-G9350 using PhantomPilots mobile app

P4 really were almost prefect, they used a lot of parts from p4, and did not redesign for p4p. The Gray form with the p4p gimbal is what is killed those bubbles. If the gimbal lock is not as right the Gray form is a good idea. But for that gimbal lock If you take out and not use the Gray form...

Sent from my SM-G9350 using PhantomPilots mobile app

You missed that, I use heat gun to allow the gimbal lock to deform to a point so it is just touching the gimbal,It won't break if you do it careful it is like bending acrylic. I am waiting for 3rd party gimbal lock tho.

But you know what i actually contacted dji support and they send me a video showing the same vibration occurs to any p4p, so i have gave up for a while but i really found this annoying so i taken it apart and keep testing and found that solution and reason. My p4p is not vibrating any more and i...

If you do this That vibration will be disappear. Every P4p have different severity about this vibration. Some are very intensive. After i replaced the 4 tiny bubbles (vibration absorber bubble) The vibration will disappear, because it give more strength to prevent the entire gimbal falling to...

Do you have p4p? can you try titling your p4p to the left like this to see if you have high frequency vibration? like this video below may be have a light touch as well when it is titling. Some people have that vibration even at around 20 degrees to the left. May be have a look at this as well.

This is my post on dji forum , P4P Gimbal vibration and noise + Fix The video after replacing the bubbles, So you can see from the video the vibration is disappear. After that I used heat gun to reformed the gimbal lock a bit to make it less tight, the Gray block form is supposed to prevent...

Guys I know exactly why, but dji would not admit it, it is the gimbal lock to tight stressing the internal bubble, the 4 tiny internal bubbles, after replacing it, you will get most of the gimbal problem fix but the main things is the gimbal lock a bit too tight that mess up the bubble a bit, I...

For me 5.8ghz is always better, may be I flew above city. I notices a huge improvement in range compare to my p4. From where I flew is CE region (2km) however I constantly get over 2km, the best I have done so far is 3265meters with 5.8ghz, I don't know how it works it is just awesome. All these...